Wildcat 25 cal o rings

Forums PCP Airguns Wildcat 25 cal o rings

  • Views : 379
  • Link

    Grandfather
    Participant
    Member

    It’s me again, asking another Wildcat 25 cal question……I’m gona have a lot more so get ready !
    I have found some of the o rings for the Wildcat 25 at the o ring store site but the one in the barrel, is not on that site. If it is, I don’t see it. The size is 1.27 x 6.35 part # 4526 from FX. Can someone help me out with this. This is probably one of the ones I will need most. Thanks, Tom

    Are there other o rings on the gun that wear out fast that I should be getting ????

    Link

    Hynzie
    Participant
    Member

    GF  I GO TO GOOGLE TYPE AMAZON WILDCAT KIT AND IT POPS UP  good luck

    Link

    Snowbird
    Participant
    Member
    Link

    AirgunBill
    Participant
    Member

    “Grandfather”It’s me again, asking another Wildcat 25 cal question……I’m gona have a lot more so get ready !
    I have found some of the o rings for the Wildcat 25 at the o ring store site but the one in the barrel, is not on that site. If it is, I don’t see it. The size is 1.27 x 6.35 part # 4526 from FX. Can someone help me out with this. This is probably one of the ones I will need most. Thanks, Tom
    Are there other o rings on the gun that wear out fast that I should be getting ????

    
Get the size Buna N70  1.3mm x 6.3mm for your .25 cal. breach from the O-Ring Store. Bill

    http://www.theoringstore.com/index.php?main_page=product_info&cPath=368_12_37&products_id=1819 

    Link

    Keyman62421
    Participant
    Member

    I have been successful acquiring o rings from Air Conditioner service kits.    Also NAPA and such might be able to cross the sizes to inventory.

    Link

    Snowbird
    Participant
    Member

    AirgunBill , I bought 10 to run some test, if you use these , do you feel the pellet probe much tight than the original size.

    Link

    AirgunBill
    Participant
    Member

    “Snowbird”AirgunBill , I bought 10 to run some test, if you use these , do you feel the pellet probe much tight than the original size.

    
You will not notice the difference. If you have a set of calipers to see what the 0.03mm looks like you will know what I mean. Bill

    Link

    Snowbird
    Participant
    Member

    Thanks

    Link

    bzizzi373
    Participant
    Member

    McMaster Carr has every kind of O ring you will ever need.

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.