Which small gauge is most accurate?

Forums General Discussion Which small gauge is most accurate?

  • Views : 596
  • Link

    mubhaur
    Participant
    Member

    Some people argue that Edgun digital guage is the most accurate of all.

    My only concern is that although digital guage can give digital numbers yet as it gathers the pressure in the gun through similar pressure sensors as are used in non digital guage, it may be only as much accurate as any other non digital guage may be.

     

    However as there is no needle mechanism to move and show the pressure in digital guage , it may overcome some of the issues of small mechanical gauges. 

    On the other hand I understand that large sized professional gauges with needle for reading pressure are still more accurate and more reliable than edgun or any other small digital guage. 

    Please discuss. 

    Regards  

    Umair Bhaur 

    Link

    mikew1616
    Participant
    Member

    I bought the small Huma gauges and love them

    Link

    T3PRanch
    Participant
    Member

    ANY gauge not calibrated against a standard is an indicator at best and the quality of the indication is wholly dependent upon the resolution of the gauge! 

    Link

    mubhaur
    Participant
    Member

    I understand that normally large sized professional gauges are more reliable 

    Link

    nomojo65
    Participant
    Member

    Just buy a REDWOLF!, just joking ok… don’t chastise me!

    Link

    marflow
    Blocked
    Blocked

    is a number on a digital  gauge easier to understand or is the dial gauge easier, I think the answer is digital

    would the error on the dial gauge from reading were it is on the dial be more accurate , probably not till the gauge grew in size  so you can easy see the markings on the gauge

    so a small gauge, in digital would be as good as any dial gauge but as a dial gauge grows in size maybe not

    and one factor that has not been addressed is the cost of the gauge

    any digital gauge if small would have to be tested against a known pressure to see if it is telling you the truth but I think in PCP air guns it will be just fine

    Link

    Ydunn.223
    Participant
    Member

    Just purchased 2 of the Huma-Air digital gauges 

    going to try them out on the Impacts,should be 

    more accurate for the tunning process. 

    Link

    Hookster
    Participant
    Member

    Ydunn.223

    Just purchased 2 of the Huma-Air digital gauges 

    going to try them out on the Impacts,should be 

    more accurate for the tunning process. 

    Huma digital gauge are just edgun gauges, I would just purchase thru Brian at Edgun West. Great service and fast delivery. IMO.

    Link

    Glem.Chally
    Participant
    Member

    I wish they had a disconnect for the wires from the sensor to the display,  having these thread thin wires holding two parts together while trying to change the battery is a -unt.

    Reminds me of the opening sequence in McGyver.  

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.