What's the thread on yong heng intake?

[ImpactX]

Anyone know the thread type or size on the yong heng? Thinking of getting this intake silencer but want to make sure it fits.

https://www.ebay.com/itm/1-2-Thread-Metal-Air-Compressor-Intake-Filter-Noise-Muffler-Silencer-12-5mm-IJ/233222032653?_trkparms=ispr%3D1&hash=item364d1dcd0d:g:3U4AAOSwJqVayv~Y

 

[heavy-impact]

I believe that will fit. I use a 1/4 npt fitting in mine with a 1/2" hose running to the filter housing.

 

[ImpactX]

I believe that will fit. I use a 1/4 npt fitting in mine with a 1/2" hose running to the filter housing.

So it just screw into and replace to stock intake filter? Ok. Just making sure so I didnt have to purchase other adaptor to make it fit.

 

[airgunfans]

the thread is 1/4 BSPP, it's a parallel thread, not tapered like NPT or BSPT

 

[Jayson]

Yep, British standard, but real close to npt, most people never know the difference, but they fight little leaks and over tighten sometimes. Just FYI, the aluminum on Yong Yankers is about as hard as lead, so be carful! Or you will get to know Ali-express real well for parts like me

 

[heavy-impact]

Yep, British standard, but real close to npt, most people never know the difference, but they fight little leaks and over tighten sometimes. Just FYI, the aluminum on Yong Yankers is about as hard as lead, so be carful! Or you will get to know Ali-express real well for parts like me

Ya think he'll be fighting a tiny intake leak ?.. through teflon tape.

1/4" npt works perfectly, no need to search for an odd expensive fitting. I use a male quick connect with a 1/2" hose running to my filter. Costs about $1.50

Keep it simple.