What's the max as far as power and fpe I could upgrade mrod 25cal

Forums PCP Airguns What's the max as far as power and fpe I could upgrade mrod 25cal

  • Views : 792
  • Link

    Pcpjunkie
    Participant
    Member

    Wanting to get into pcps and not rich. I wanna coyote hunting with this is it possible to upgrade tune and mod to make a 50 + coyote killer any feedback would be awesome just don’t bust me up to much I’m new to this and don’t even own a pcp yet michigan just changed laws so all I have had is the Titan np 22 trail 22 np and nitro 177 help a newbie out lol thanks

    MOD EDIT: MOVED TO PCP SECTION

    Link

    Zephyr
    Participant
    Member

    You need to balance power with accuracy. All the power in the world is no good if you can’t hit anything.

    Link

    rockymtbiker
    Participant
    Member

    AJ can probably answer this question better than anyone, but I know that some tuners have reported as much as 90 ft-lbs.  I’m getting about 60 ft-lbs with my .22 using 29 gr Eunjins.

    Link

    ajshoots
    Participant
    Member

    A stock .25 is capable of killing a yote at 50 yards with a precise head shot. With aftermarket parts, a .25 is capable of 100 fpe but that is for 1 shot and falling quickly after. I get 8 shots under 3% at 70fpe with one of my .25’s. It makes as much power at 100 yards as a stock marauder makes at the muzzle.

    Aftermarket valves such as WAR (wickedairrifles.com) or a Hill valve (hillairgun.com). Are capable of alot of power when matched up with a larger transfer port and heavier hammer spring.

    Link

    Pcpjunkie
    Participant
    Member

    Thankyou guys for the info I’m researching and researching don’t wanna start of wrong wanna enjoy my entry into pcps

    Link

    ajshoots
    Participant
    Member

    If you need any more info, just ask. Lots of good aftermarket support and tons of available info for modding and tuning the marauder.

    Link

    pbguns
    Participant
    Member

    I took out 4 yotes with a stock .25 synrod before doing any mods to it.
    I bought it specifically for a yote problem around my house.
    It has been working great for me, not so good for the yotes…..current count is 6 with the .25

    Link

    spysir
    Participant
    Member

     It’s all shot placement, other than adjusting over a chrony for your shot count as long as it’s grouping very well a stock .25 marauder should get the job done.  Do keep in mind unless the law changes ( is there a season on coyote or not ? ) you might need to remove the shroud for “hunting”.  You will simply not believe how good the trigger is on those rifles.

    John

    Link

    Pcpjunkie
    Participant
    Member

    You guys are awesome and I will be probly asking some questions I’ll keep you guys informed I’m probly definitely gonna go with the the marauder but in the armada platform. I was looking into the p-12 but I think I’ll go with known product to start and then learn. And then go with the p12. I do like the look of the bullpup but think I’ll learn the pcp world to know how it worKS again thanks

    Link

    pbguns
    Participant
    Member

    I changed my synrod over to armada furniture not long ago, Its more solid & doesn’t flex like the synrod stock did.

     

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.