What scope for 750s?

Forums Air Pistols What scope for 750s?

  • Views : 501
  • Link

    B.Guns.
    Participant
    Member

    qball

    B.Guns.

    I received the Discovery scope I had ordered for the 750 and it came with a crooked recital and if my eye relief was just the slightest bit off my view looked like i was looking into a bottle. It's going back. Im really looking forward to the 750!!.

     

    good to see I’m not the only one having the same problem with discovery scope. Returned mine also. 
     

    Currently im planning on using vector 3-12 compact scope for the pp750. Question is how solid is the front mount on the barrel or am I better off with one piece scope mount/rings.

    I'm going with a Center Point 3-12 FFP that Crosman has on sale right now. It's quite a nice scope. Should be good for the 750.

    I'm not sure how solid the front dovetail is but from my understanding it gets tighter as you tighten your rings. If the front isn't very good I may use a bugbuster instead.

    Link

    kkarmical
    Participant
    Member

     

    Ok so I think it's going to be this one for a while.  Forgot I had this 2-8×20 and found it looking for a set of 30mm rings.

    Offset mount puts eye relief perfect fit, sighted in at 25 yards, light weight compared to the full scope I had on.

     

    Link

    thane
    Participant
    Member

    UTG 1" BugBuster 3-12 x 32 side focus lite at 12.7 oz.

    Low profile rings just clear magazine and hold a closer near zero to reduce arc. Adding some channels to stock rods make a new, shorter index reduces LOP to match eye relief. 

    Link

    legionair
    Participant
    Member

    thane

    Cool grips! Looks better than the factory grips

    Link

    bearair
    Participant
    Member

    Sharp looking pistol for sure. Interested to see what you do with the stock piece.

    Link

    thane
    Participant
    Member

    Just been shooting as pistol for a couple weeks while lowering the power to 17FPE, wanting to go even lower. My offhand pistol skills are lacking, but I really enjoy how slim and tight feeling this gun is without the stock bits. In time the stock will find it's way back on, probably with a new, longer barrel to keep up with the 24FPE it has made at high settings. 

    Link

    bearair
    Participant
    Member

    It would be cool if someone came up with a buffer tube adapter for this pistol. 

    Link

    MontyBurns
    Participant
    Member

    Vortex Crossfire 1-4 ×24.  A wee bit heavy  but the weight is distributed with the Tatsu on the front end.

     

    Link

    thane
    Participant
    Member

    I don't know how you guys shoot with fixed 100yds objectives, especially with pistols/carbines.

    Link

    kkarmical
    Participant
    Member

    thane

    I don't know how you guys shoot with fixed 100yds objectives, especially with pistols/carbines.

     

    With this 2-8 scope I got it with the intention of adjusting the parallax, but haven't felt the need to do so.

    I'd always been told that parallax on lower magnification wasn't really as big of a deal as it's been made out to be.

    I have another ordered, a 2-7 ×24 that does adjust down to 10 yards, but I may end up putting it on another gun, as this one has been dead on so far.

Viewing 10 posts - 21 through 30 (of 30 total)

You must be logged in to reply to this topic.