What do I need to regulate royale 500?

Forums PCP Airguns What do I need to regulate royale 500?

  • Views : 281
  • Link

    mubhaur
    Participant
    Member

    I want to install a regulator in my fx royal 500.

    Since I have to do it myself, I need to know if I would also need to replace valve, valve seat and transfer port as well or just installing the regulator and drilling the vent hole is good enough for getting 900 fps with 25 grain pellets?

    Regards,

    Umair Bhaur

    Link

    mubhaur
    Participant
    Member

    Just talked to Mr. Ernest about this matter. Concluded that royale 500 just needs a regulator.

    No other part is needed to regulate it.

    Regulator pressure may be set between 150 bars to 160 bars as per need of the user.

    Link

    Smaug
    Participant
    Member

    Thanks for following up. I’m sure this will benefit someone in the future, when they search for it.

    Let us know how it goes!

    Link

    TrapdorSpydr
    Participant
    Member

    Precision Airguns and Supplies in Dryden Michigan sells them already set at 150 bar.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.