Well now i did it. 2 pellets loaded in a FX wildcat

spectr17 · Jun 29, 2017

I had trouble with the bolt closing so I pulled the magazine out to look at it and when I put it back in I thought i had the mag lined up to not to load a 2nd pellet into the chamber. Well it appears thats what happened, i cant close the bolt now. Before i screw anything up, what would be the best way to get the 2 pellets out? Push them back out of the chamber from the barrel end with a cleaning rod? I didnt try and force the bolt so they shouldnt be jammed in too tight.

teeken · Jun 29, 2017

I have accidentally double loaded 2 pellets twice. I just unscrew shroud/ldc ... and safety shoot pellets out with bolt closed.

Alan · Jun 29, 2017

This is a great time to own a cleaning rod.

Scalf · Jun 29, 2017

Push them out from the end of barrel using a wooden dowel rod. The wood will not hurt the barrel. The worst thing is you mess up the oring but that is unlikely.

Michael · Jun 29, 2017

I've double loaded numerous airguns and never had a problem shooting them out. Of course your fps will be cut in half. If you have a silencer/baffles and you're worried about clipping then just take off the end cap/baffles or silencer first.

Ravenred · Jun 29, 2017

Yes I have double loaded my wildcat, and impact, and Bobcat mk2 several times it's going to happen if you shoot enough, I always just shoot them out with no problem. The bolt is harder to close on a double. Also I have had a pellet fall out of my wildcat backwards and get lodged in the action.
there is a little plate you take off to access that part.

Swing360 · Jun 29, 2017

If you can close the bolt, let her rip! Take off any moderator you may or may not have for potential clipping reasons.

I myself would use a push rod(cleaning rod) NOT A RANDOM STICK and push them back out if i were at my house or range. In the field i'm letting them fly

Mousefart · Jun 29, 2017

I would certainly use a wood dowel rather a cleaning rod if going in from the front end.

Swing360 · Jun 29, 2017

"Mousefart"I would certainly use a wood dowel rather a cleaning rod if going in from the front end.

Correct, I should have clarified better. Thank you

spectr17 · Jun 29, 2017

thanks everyone. I cant find my dang cleaning kit so imma shoot them out.

Search

Search

Well now i did it. 2 pellets loaded in a FX wildcat

spectr17

Member

teeken

Member

Alan

Member

Scalf

Member

Michael

Administrator

Ravenred

Member

Swing360

Member

Mousefart

Member

Swing360

Member

spectr17

Member