Walther 1250 Dominator Help!!!!!!!!

Sheharyar · Feb 5, 2016

Hey Guys,
I want to know that what setting of washers do you use in the regulator of walther 1250 dominator (with fps).

And when i screw in the cylinder of my walther in the regulator some of the air leaks from the small hole on the regulator.I wanted to know whether it is normal or not?

Steyr · Feb 5, 2016

might want to try a more specialist forum - Roald knows a lot about these guns - http://www.network54.com/Forum/583201

John "spysir" Blount · Feb 5, 2016

I've only seen one filled twice, that one did very briefly seep a little bit bit of air from the vent hole, just briefly when first screwed in then not again until the cylinder was removed and refilled. Maybe common maybe not but you are not alone and my friends has never had an issue.

John

Search

Search

Walther 1250 Dominator Help!!!!!!!!

Sheharyar

Member

Steyr

Member

John "spysir" Blount

Member