Walnut stock for cricket

After tru oil, cooked linseed oil and beeswax.

Here is the final result. Cricket now holds better and is more balanced

I thank you for appreciating the work. If it weren't that Italy / USA are a bit too far away, it could also be done. If I don't disturb your forum, I will create some threads with my works .... I like to have your opinion. They are stocks made for various compressed air weapons and also for a CZ Varmint cal. 22LR.

Genesis, spero che il cricket with the stock dof noce nero sia migliore di Diana. I bulpupp Diana sono roba cinesi rinominate Diana. Quello che ho fatto è stata la mia libera interpretazione di uno stock del produttore dell'Europa orientale .... LP. Non so se lo conosci negli Stati Uniti.

The input for the action and the barrel is all done by me with a normal Bosch portable milling machine. The work is long and one must be precise, so that the action enters precisely. Then all the work I do with the normal tools that you have in a home workshop ... Drill, band saw, circular saw, chisel, dremel, sander, electric file and lots of sandpaper.

Ho costruito molti stock, oltre 20, sia classici che bullpup, ma non ho ancora precisato per lo stock della corona. Non sono un falegname; come ho scritto nella mia presentazione qualche giorno fa, lavoro nel laboratorio di emergenza dell'ospedale, quindi faccio questi lavori nel mio tempo libero, quando la famiglia, il lavoro e altri impegni presi mi vengono. Per costruire uno stock, se avessi tempo libero, in 3/4 giorni ne costruisco uno (poi ci vogliono 6/7 giorni per dare olio di lino e cera) ma costruendolo quando ho tempo e desiderio, mi ci vogliono anche 2 mesi.

 

I apologize to everyone for writing in Italian. Now you can better understand what I had written in the two posts.







April 12, 2020 at 1:26 pm

Genesis, I hope cricket with the black walnut stock is better than Diana. The Bullpup Skyhawk is a Chinese air rifle renamed by Diana.
What I did was my free interpretation of an Eastern European manufacturer's stock ... LP Gunstocks.
I don't know if you know him in the USA.







April 12, 2020 at 2:25 pm

I have built many stocks, over 20, both classic and bullpup, but I have not yet chosen which line the stock will have for my Crown.
I'm not a carpenter; as I wrote in my presentation a few days ago, I work in the emergency laboratory of the hospital, so I do these jobs in my spare time, when family, work and other commitments allow me to devote myself to my hobby.
To build a stock, if I had free time, in 3/4 days I build one ( takes 6/7 days to give linseed oil and wax) but building it when I have time and desire, it takes me even 2 months.

Genesis, really beautiful ... congratulations!!!!!
Now the Diana Skyhawk looks like an Edgun Matador R5M.
What type of wood did you use to make the new stock?