UTG Leapers Reticle correction?

Jump to latest Follow Reply
dpeterman

dpeterman

Member
Jan 6, 2017
116
1
Michigan
Is it even possible to correct a reticle that is ever so slightly out of alignment? I have a nice inexpensive scope that stays true but just noticed the recticle is actually rotated maybe 1-2 degrees CW if I align the SF Wheel in a true vertical position. I know this has always been the case with the scope but only now became obvious when I mounted the wheel on the scope and noticed the tilt. At the end of the day I would certainly be able to live with the defect and to deflect the ribbing from the old timers I could spin a yarn about how it's by design to improve on the scopes ergonomics :p

Thanks for any useful input and ofc any lack of input telling me I should have paid more.
 
From what I understand it is possible to mount a scope in such a way that your vertical cross hair line is perfectly vertically aligned. This way you can use markings on the reticle for hold over at various distances. Just hang a plumb line at the distance, make sure your rifle is positioned level and align vertical cross hair with plumb line by rotating your scope in the rings.

I don't believe it is possible to correct misaligned reticle.
 
Upvote 0
LIFETIME WARRANTY 
The Best Never Rest Warranty - LifetimeLeapers, Inc. warrants that all UTG & UTG PRO products conform to published specifications and are free from defects in material and workmanship. We will repair or replace defective products for the duration of the product's life span. Our dedicated in-house customer service professionals will provide the best-in-class UTG experience. 

NOTES:
  • Our warranty does not extend to products disassembled, damaged from misuse, accidental impact, negligence, natural disasters/accidents, or unauthorized repair or alteration.
  • For UTG SPORT airsoft products, please refer to the warranty information on each individual product page which supersedes the Best Never Rest Warranty.

Warranty Instructions

You can either contact the store where the product was purchased OR get in contact with us on our website. 

To submit a warranty case to Leapers/UTG, please follow the following steps: 
  • Go to Warranty Request under Customer Service on www.leapers.com.
  • Fill out the necessary contact and product information to the best of your knowledge.
  • A purchase receipt is required for all warranty cases and needs to be attached at the end of the form.
  • Finalize the case by submitting the information to us.
  • You will hear from one of our customer service reps within 24-48 hours and we will provide you with additional information and instructions.
For any questions regarding the process, please feel free to call us at (734)542-1500 or email us at[email protected]
 
Upvote 0
I will look into it. What I had on the paperwork from within the box is as follows:
2493379d01db227d551c2162dcec8bef.jpg

Just realized that is a local phone number in your comment above.. maybe I can avoid shipping costs.. that would be a huge bonus.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu