This is what I wrote in a different discussion: " I have a question about parts compatibility. I have a Gamo .22 Urban and I broke the safety somehow during cross country shipping for a custom Clague shroud, not sure when it happened but now I want to fix it. Gamo USA says the trigger assembly is not a stock part, I have to send it in for warranty fix or replace. But since I have removed the stock ("permanent") moderator, installed a new custom shroud and Huma regulator I'd rather avoid the shipping to Gamo for a trigger assembly. By the time I pay for shipping for the rifle I can almost pay for a new trigger assembly from across the pond. Here's the issue, the Urban part number from the PDF I have is 36009. Looking on line at Airgunspares I find a Buccaneer assembly and a Coyote assembly. They look identical with different part numbers, 36006 and 16-9352 respectively. The Gamo and Buccaneer numbers 36009 and 36006 seems like it could be a typo but even if not, I'm guessing that the parts are all the same or the very least interchangeable. Just different numbers for different countries/markets/brand names. Anyone out there have any experience using Buccaneer or Coyote parts in the Urban? " I have the different parts break downs for the different rifles, so I have the respective part numbers. I'm hoping for some input before I make an order and perhaps waste some money.
