Uragan 30 cal thread adapter

[rangur1]

I know this comes up every so often , I know eaglevision has a Vulcan adapter to 1/2 unf but it lists only up to 25 cal. I am being a bit of a stubborn ass because I have all my mods 1/2x20 I don’t like having different threads around because I will rotate mods every so often. Don’t need a cross thread. I plan on getting a Uragan in the future and I always use 30 cal mods. Ideas? 

 

[Yo]

Drill out that $14.99 AoA EAGLE VISION adapter if you must or pay $40--$50 for a proper one elsewhere but I would check it first then drill it bigger if needby. YO!

 

[Yo]

A 9mm/.357 pellet BARELY clears the Eagle Vision adapter hole so you shouldn't need to drill it if shooting a 30 caliber I just checked. YO!

 

[rangur1]

A 9mm/.357 pellet BARELY clears the Eagle Vision adapter hole so you shouldn't need to drill it if shooting a 30 caliber I just checked. YO!

thanks for the intel.

 

[Yo]

Welcome! And may the schwarz be with you! YO!