Is their somewhere else to buy the Tuxing compressor beside's Ali Expess? i cant seem to get pass all the pass words?i dont see them on E-bay ether? thanks Willy
Upvote 0
Tuxing compressor
- Thread starter scubajeeper
- Start date
Willy, I tried to find them somewhere other than Ali Express, but could not. I didn't have any problem setting up an account. It was no different than setting up an account anywhere else. Try it again, I still use my compressor just about everyday. And hope to for years to come.
Upvote 0
Ill have to have my daughter deal with it then pay here? thanks guy. Daughter show up"" compressor on the way" i hope it come's with a gauge and a fill wip?
Upvote 0
Well i got the Tuxing.No oil in it?does the little bottle that come's with it suppose to fill it? does'nt seem like much? or you suppose to buy extra oil? what wait?tried to call the number on the tag to Hong kong no worky.thanks any help? Willy
Upvote 0
I had to buy oil for mine. Not sure now where I got it. It is synthetic air compressor oil. Not hard to find. They don't hold much oil. The reason it doesn't have oil in it is they are not allowed to ship anything into the US with oil in it. Don't know why just that is the rules.
Upvote 0
Hi jim again" what is the aluminum cylinder for ?it looks like some sort of a filter? does it suppose to have a foster fitting and the hose hooks to it then to the fill tube?thanks again man"
Upvote 0
Yes the aluminum cylinder is the water filter. It should have a fiber filter that goes in it. It then connects to the hose, then the hose connects to the outlet on the head. I hooked a female foster fitting on the other end of the water filter.
Upvote 0
Hi Jim ,i think i got it all fugue d out expect for the synthetic air compressor oil.?i see lots of car synthetic motor oil? could that be used? 30 wt. non detergent.I found few place's that carry compressor oil,but not synthetic?also you open both vales then start the compressor then turn the vales in and open them up again when you get ready to shut it down? on u-tube they start with the vales in then turn it off then open bleed off vales.Thanks again guy" Willy
Upvote 0
Willy, I just found the bottle of compressor oil. It is not synthetic. It is just compressor oil. It came from Tractor Supply. For some reason I thought it was synthetic. Sorry for the mix up. I close the valves, start the compressor, then open the valve on the tank when the pressure get close to the tank pressure. Once the tank gets to pressure I shut down the compressor and then close the valve on the tank, open the water drain valve, then open the blead valve. Of course if you are filling your rifle you don't have a tank valve to open.
Jimmy
Jimmy
Upvote 0
Upvote 0
A member from one of my groups just bought the yong heng compressor from eBay which is similar to the one you are looking at I think it was $400 I read the specifications and unlike the others it does not say to use only liter bottles but it doesn't say that it will fill the big ones either anyway it might be a little more expensive than the one you're looking at butt we know the quality is there just not how long it will last anyway check it out on eBay unfortunately the videos are not in English LOL
Upvote 0
Calling Jimmy,Will i had a bad connection and went out of the room for a few minutes and came back and it started make a funny nose? i looked in the bucket and the pump was not working.I plugged it straight into the wall and it fired right up"so restarted the pump and it made a scrhing sound intermedley.The crerching stopped but it only pumps up to 3300 psi.I think it must be in the head?Do you have a phone number to get a hold of the people to get parts? my e-mail is ([email protected]) maybe theirs a unload er vale in the head that i can replace?i got lots of O rings and vale seats with it.Thanks again Willy
Upvote 0
Hi Jim,well i got ahold of Jokim Soo and he suggested changing the 4 rings on the small piston.Well got it all off and button up" pumps up to 4500 still got to work on the connection where the 110 goes into the compressor.Thanks man for the help.Willy
Upvote 0
Glad that you got it going. I would be lost without mine now. As you have found out these compressors are very easy to work on. Parts are cheap too. I done away with plug in on the compressor for the electric cord. I hard wired a larger cord to the compressor and switch. No more chance for a bad connection. Also plug the water pump into a receptical by it's self. That cuts the amps the compressor is drawing.
Jimmy
Jimmy
Upvote 0