Top tip impact hammer stop removal

Forums PCP Airguns Top tip impact hammer stop removal

  • Views : 263
  • Link

    bucketboy
    Participant
    Member

    here is a top tip for hammer stop removal

    get one of these, fit it over the hammer stop and tighten, this allows you to pull on the stem so that you can grip it with long nose pliers, then you can easily unscrew the stop. It causes no damage and makes things a whole less awkward 

     


     

    this is a stock photo of an er11 collet chuck, they can be bought including a full set of collets for a few dollars off eBay 

     

    Bb

    Link

    Airgun-hobbyist
    Participant
    Member

    Nice solution to slippery fingers!  Thanks for sharing.

    Link

    IguanaPolice
    Participant
    Member

    That's such an easy fix but GENIUS at the same time!! Maybe a larger size would help take take the barrel out. I hate using pliers on it. Even with cardboard or Leather (which I haven't tried) I feel like I may mar it. Especially first time removal with the o-rings on it can be a bit tight.

    Thanks. Great tip.

     

    Link

    FearnLoading
    Participant
    Member

    bucketboy

    here is a top tip for hammer stop removal

    get one of these, fit it over the hammer stop and tighten, this allows you to pull on the stem so that you can grip it with long nose pliers, then you can easily unscrew the stop. It causes no damage and makes things a whole less awkward 

     


     

    this is a stock photo of an er11 collet chuck, they can be bought including a full set of collets for a few dollars off eBay 

     

    Bb

     

    This is a great idea. Can you clarify what size we should get  you get these in different sizes so asking  

     

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.