Tominco's IMPACT !

Jack.k - Thats right. and the silver piece you see inside the end of the Impact barrel seems to be a spacer/guide/stopper (for the shroud) all in one. 

rockymtbiker - Thanks for the tip! I that's one inexpensive and very easy way that everyone can personalize their own Impact. I'll have to go take a look myself! :) ...Hmmm, Do they make a nice laminate AR-15 grip?

FunGun - Sound effects? LOL! No, that was a slanted rock out at about 45 yards. In a way, I wish I hadn't shot something because (although it was fun) it ended up being a little distracting from focusing on the shooting sound. I am wondering if it would work better if I moved the camera even further out.
Yes, an SD of 2 is terrific! If this rifle needed a break in period, I'm pretty sure that was done even before I got it. 


------------Yes, I could download a db app and use it. But, imagine if I were to post here and say the db level is ###, and then extended it's ###, and the Wildcat is ###. I didn't want to do that because (to me) that would just be a bunch of numbers to look at without very much meaning. Shooting at the camera (albeit risky) was a lot more fun for me and a lot more entertaining for you all to watch. The camera still picks up too much sound but, I think it gives you guys at least a starting point for what to expect. I just wish I had a Marauder to compare against too. That would have pertained to a lot more shooters. 
 
55111.jpg

Made by DPMS, Tom. :) Retail price is only $33.

Stephen
 
Tom,

Think you and Michael got the same weight. Do you think the fact that it weighs more than the originally-posted 6.2 lbs is due to the extra metal of the sliding moderator? In an earlier post one of you mentioned that you can unscrew the sliding moderator and replace it with the originally shown baffles; would you be willing to unscrew the sliding moderator and weigh the Impact again (if it's too much trouble don't worry about it; I just thought it might confirm my suspicions)?

Thanks as always.

Stephen
 
rockymtbiker - I tried to take the moderator off once before. But I don't have proper instructions at this time so, when it got hung up on the stopper, I stopped and put it back together. I like it how it is and I don't want to mess it up or get a piece of grit in there and then scratch it up. So, I'd like to leave it in place. 
It doesn't seem like it would have saved .8 lbs to me. 
Where did you see 6.2 lbs posted? Are you thinking of the reference I made to the .22 Wildcat in the vid? 

Luckydog - I think that might just work for some folks. Thank you for sharing. That would make the rifle hang upside down and pointed to the ground and rear. Should make it easy to grab and swing up for a quick shot as well as keep the strap out of the way. You might just have to watch to see if it would hit that bottom tube back there. 

Tom
 
rockymtbiker - Thanks for the link. You might try posting this over on michael's thread. His scale looked a lot better than mine and he might be able to answer that for you. If I'm not on the cheapy hanging scale then, I'm on the bathroom scale, or the pellet scale. I think I'd be overweight on the pellet scale, and underweight on the bathroom scale. 
Tom
 
A Picatinny rail is 1913 standard they are one in the same... though I get what your asking
https://en.wikipedia.org/wiki/Picatinny_rail



I asked Larry Pierce (National Dealer Sales Manager) whom is the gentlemen driving the AOA truck around the country right now "if the FX Impact had a true Picatinny rail" and he said "YES".

and believe me I care about that too because all my scope mounts are true Picatinny mounts and cost a bit of $$$.