The New Rapid Air Weapons Chassis System is Here! This thing is AWESOME!

Jump to latest Follow Reply
UpNorthAirGunner

UpNorthAirGunner

Member
Oct 19, 2017
400
115
MI, United States
RAW partnered with American Built Arms Company to bring this platform to the airgunner community and it is SICK!

1582147815_19898664885e4da8e75a84a5.32840832_IMG_6634.jpg


The butt stock system is amazing. With a simple flip of a button and you got adjustable length of pull, rotate a dial on the side and you can easily adjust the cheek rest. It comes with a spec buffer tube with a standard locking ring so it can take single point sling mounts.

1582147859_17397356565e4da913c19760.39488420_IMG_6641.jpg


1582147873_19711702465e4da92120c2d2.21584160_IMG_6640.jpg


Up front on the main chassis I installed a 9 slot Magpul rail on the M-lok positions found all along the main chassis. I'll be adding more rail for my IR flashlight for night ops with my ATN Night Vision.

So initially I am going to be setting up my RAW HM1000x as a long range shooter so I swapped out the hand grip for the ERGO Air TDX-0™TACTICAL DELUXE ZERO ANGLE SUREGRIP® and also added the Accushot Monopod to the rear and Atlas 5H bipod up front.

1582147896_18880147125e4da9389484c9.52000297_IMG_6639.jpg


This chassis is an easy drop in replacement for ANY RAW you've got! Just line up the hex pin to the hammer spring tension adjuster and there is single screw in the bottom of the chassis and you are good to go.

1582147949_18216332135e4da96d530856.40008508_IMG_6635.jpg


1582147961_6313264855e4da9792234b2.72595162_IMG_6636.jpg


I am going to be stretching out this SWEET rig soon, but so far I can say with 100% certainty this just took the RAW HM1000x platform to the next level!
 
In reviewing the posted pics with some observations, it appears that the cheek piece is ambidextrous by flipping the parts around.

The butt plate however does not seem to have any design or mechanical features which allow for vertical movement.

*MADE IN USA* can be seen in the second pic just under the cheek riser. Of USA parts, presumably yes. However, the raw materials may be globally sourced. Not much is made 100% anywhere these days. At best, most likely milled and assembled in the USA.

Nice bit of kit, even better with a few mods. I suspect there may be a version 2 to address the butt adjustment.



top
 
Upvote 0
In reviewing the posted pics with some observations, it appears that the cheek piece is ambidextrous by flipping the parts around.

The butt plate however does not seem to have any design or mechanical features which allow for vertical movement.

*MADE IN USA* can be seen in the second pic just under the cheek riser. Of USA parts, presumably yes. However, the raw materials may be globally sourced. Not much is made 100% anywhere these days. At best, most likely milled and assembled in the USA.

Nice bit of kit, even better with a few mods. I suspect there may be a version 2 to address the butt adjustment.



top
Click to expand...

You are correct, the cheekpiece adjuster can be moved to either side of the stock for left-handed shooters. 

The butt plate is not vertically adjustable, however, the chassis system itself uses a Mil-Spec AR-15/M16 receiver extension (buffer tube) and can be ordered without a stock installed on the receiver extension, so if there is a stock the shooter likes better, then ANY AR-15/M16 stock will work. The stock you see in the photos is from AB Arms out of Glenn Rock, PA. We have teamed up with them to provide the stock, the receiver extension and the pistol grips. The rest of the chassis ( the chassis itself, the trigger guard and the buffer tube adapter) are all made in house by us. 
 
Upvote 0
Check out the new video:

https://www.youtube.com/watch?v=E-2Q0IjqIAQ

My Rapid Air Weapons RAW HM1000x has been installed into the new chassis system and took her out to 100 yards for the Umarex Split the Pick Challenge. Even in 25 degree weather, two feet of snow, and shooting prone, I am getting MOA groups at 880 FPS shooting in .30 cal with JSB Exact 44.7gr! Hit that pick on the first try at 100 yards, but just took the tip off. I didn't realize it as I couldn't see it in the scope! I went back and shot off the rest of the pick. It was windy - but got the job done!

I've added few toys to the platform to include the ERGOAir TDX-0™TACTICAL DELUXE ZERO ANGLE SUREGRIP® - extended rail under the bottle - B&T Industries Atlas 5-H bipod with ski feet up front and Accushot medium height mono-pod to to the rear. Running the Hawke Frontier scope with medium height rings. The target I am shooting at in this video is the shootingtargets7.com Know Your Limits Target. Best training target on the market!
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu