DAYSTATE REPORT

You have to type 515MMV* into the search box on the oringsandmore site. Weird, but you have type the * star after the sku number...

Those are the ones I purchased for my redwolf,



Viton Heat Resistant O-rings

• 5mm ID x 8mm OD x 1.5mm C/S
• 75 Durometer Rubber Viton O-rings
• A general purpose Viton® (Fluorocarbon Elastomer) compound suitable for applications requiring resistance to high temperatures and compression set. Outstanding resistance to blended aromatic fuels and straight aromatics as well as halogenated hydrocarbons. Good resistance to strong acids and steam. Temperature range -20° to 400°F (-29° to 204°C).
• Color Brown
  Price is for 10 pcs
  

Here.. this is the easy way

http://www.oringsandmore.com/viton-fkm-o-ring-5-x-1-5mm-price-for-10-pcs/

This is for the RedWolf .22 and I don't know what the size is for the .25. Just find the size on the daystate page and the size will be in this same section of oringsandmore.

Crusher

thanks mike ! i would never have thought of the * but just saw they say that on the main page

but these sizes are correct ? 

• 5mm ID x 8mm OD x 1.5mm C/S
• 6mm ID x 9mm OD x 1.5mm C/S 

for .22 and .25

I have a question though to Daystate / Mr. Tony, why dont we have a list of parts and schematics like the ones which comes with fx airguns such as the impact and the crown?

the parts diagram which is printed in the manual and available on the net isn't very legible / understandable so not quite conducive to self help, in my opinion.

A parts list with description and sizes etc would also have been very welcome. 

I am a newbie in pcp rifles but I'm hooked.... addicted would be better suited... to the sport. I need to keep my rifles working and without any technical / dealership support i am dependent on what's available in print or videos to keep going.

But i see a wealth of information and knowledge and people willing to help here on this forum. I shall survive

Thanks all !

I would too like a manual exclusively for my Daystate Wolverine R and not the generic Wolverine one that I got.

My wolverine R .22 Hp

it's not shooting great 

regulator is set to 170 bar 

880 with 25.4

would like to go up to 920 fps 

by hummer can we 

or increase the reg ? 

Also would like a manual for the R 

i would like to set it to shoot or 18.1 around 960 fps

or 25.4 around 920 

any input wolverine R owner will help 

Here.. this is the easy way

http://www.oringsandmore.com/viton-fkm-o-ring-5-x-1-5mm-price-for-10-pcs/

This is for the RedWolf .22 and I don't know what the size is for the .25. Just find the size on the daystate page and the size will be in this same section of oringsandmore.

Crusher

Click to expand...

Thank you. 

But there isn't a size chart anywhere on the daystate page, not that I could find.

Could you point me in the right direction please. Knowing the right sizes would be great. Then I could order all the orings for the three daystate rifles in one go

Here.. this is the easy way

http://www.oringsandmore.com/viton-fkm-o-ring-5-x-1-5mm-price-for-10-pcs/

This is for the RedWolf .22 and I don't know what the size is for the .25. Just find the size on the daystate page and the size will be in this same section of oringsandmore.

Crusher

Click to expand...

Thank you. 

But there isn't a size chart anywhere on the daystate page, not that I could find.

Could you point me in the right direction please. Knowing the right sizes would be great. Then I could order all the orings for the three daystate rifles in one go

Click to expand...

Zulfikar Brother,



Polyurethane is also a very good material for breach seals. It is a bit costly but not much and is worth it. But NBR is no slouch.

thank you Umair sahib, but i need sizes for daystate. i have complete sets for both the impact and crown and need to do the same for saxon, pulsar and redwolf.

PUR seals are difficult to find

thank you Umair sahib, but i need sizes for daystate. i have complete sets for both the impact and crown and need to do the same for saxon, pulsar and redwolf.

PUR seals are difficult to find

Click to expand...

yes its good to keep all O rings in hand before anything goes South.

Enough of this oring talk  The Daystate Red Wolf is an awesome airgun. The HP .22 with the redesigned monsters is going to smash some larger calibers in upcoming competitions!! Hide and watch!!!

  

There are some hungry Red Wolves lurking people!! 

My RedWolf is hungry...she's been waiting to eat more 25grs for 2months! Who bought up all the redesigns??? ERRrrrr

Oregun, Give us details of distance to targets, pellet cal., weight, velocity please!, thanks

For a typical outing, we set-up at 50, 75, & 100. 

The targets pictured above are at 50 yards. All shot using the JSB 25.39 Monster Redesigned. Velocity is between 940 - 945. ~80 shots on high.

Excellent! 

Hello-

I, too, was looking for more information about the o-rings for my Red Wolf. Here is the Red Wolf parts diagram and list AOA shared with me-

View attachment 1536337165_16280432995b92a50db62b97.71624394_Red Wolf Parts Diagram_original scan.pdf







It was not really legible, so I processed it through adobe and excel, and it came out like this-

View attachment 1536337278_20456804655b92a57ecfb596.68783492_Red Wolf Parts Diagrams and Parts Lists.pdf

Kind regards,

641

Good stuff. Thank you 641. 

Thank you 641

My RedWolf is hungry...she's been waiting to eat more 25grs for 2months! Who bought up all the redesigns??? ERRrrrr

Click to expand...

Nice shooting 

Thankks 

Just got a pack of 50 orings for 22hp RW. $7.60 delivered off amazon.