OK well this week I got the taipan veteran std out , If any remember I got it shooting about 50fpe with a hammer spring and a bit of porting , I was told here by My friend Ernest is selling a plenum adapter for the veteran so I got one in mail yesterday , and I now ordered a huma reg so I can know my reg pressures I know my reg said 134bar n it and I went 5 clicks to give it about 10 more fpe , but This reg didnt fit my testers ,
so I installed the plenum and went to fill it and I hear sheese , well , when installing it the spring for valve moved , so I had to do it 2 times and it now seals , OK great , now for next issue ,MY donny fl wont fit no more with the extension in the tube , the air tube is hitting the moderator which is 1.6 inch model I did order a 1.22 inch last night so I can install the protective fill port sleeve ,
I had to remove the moderador i always used on this gun ,,
power test later today , it did have 50fpe before
so I installed the plenum and went to fill it and I hear sheese , well , when installing it the spring for valve moved , so I had to do it 2 times and it now seals , OK great , now for next issue ,MY donny fl wont fit no more with the extension in the tube , the air tube is hitting the moderator which is 1.6 inch model I did order a 1.22 inch last night so I can install the protective fill port sleeve ,
I had to remove the moderador i always used on this gun ,,
power test later today , it did have 50fpe before