Taipan Veteran Clip (Mag) Holder

Forums Other Parts, Accessories, & Equipment Taipan Veteran Clip (Mag) Holder

  • Views : 218
  • Link

    Papy_Yosh
    Participant
    Member

    All,

    As some of you are aware I made a clip (mag) holder for the Taipan Veteran. I just wanted to put the latest version in one topic and being able to update it instead of creating or posting the same photos 20 times in different questions. The holder can be used on the left or right side. you can add up to 6 holders on the veteran. The plus with the older, is that you can reload the pellets with the clip on the holder. It facilitate the reloading process by limiting the handling. Just lay the Veteran on your leg or legs, get your pellets and reload. No need to dig in your pockets, hold the pellet box in one hand, reload with the other one.

    To avoid any confusion, the design or end product isn't Bizill's work. What you are seeing here, is only based on his original work and as been redesigned by me.

    So there it is:

    CAD View

    On the Veteran

    PM me if you are interested

    • This topic was modified 2 months ago by Papy_Yosh.
    Link

    h2okenny
    Participant
    Member

    I would highly recommend these to anyone with a Veteran, they work great. I've also found the single shot loading tray will also fit one if you're careful to center it.

    Link

    Papy_Yosh
    Participant
    Member

    h2okenny

    I would highly recommend these to anyone with a Veteran, they work great. I've also found the single shot loading tray will also fit one if you're careful to center it.

    Thank you  very much for your review, I never thought about that that is good to know.

    Link

    Bizill
    Participant
    Member

    There are NOT the original Bizill holders. Just someone copying. I don't endorse these in any way.

    Link

    Papy_Yosh
    Participant
    Member

    Bizill

    There are NOT the original Bizill holders. Just someone copying. I don't endorse these in any way.

    Bizill,

    I have stated at the beginning of my work that this they were not yours but taken from your idea. I never said that they are yours. I started to produce these after people were asking for them and saying that you were not doing yours anymore. I am sorry for any confusion. Go back to what started it Anyone making Taipan Veteran magazine holders?

    Respectfully

    Papy_Yosh

    Link

    Hepotter
    Participant
    Member

    Received my cheek rest and magazine holders.  Well made and fit perfectly.  When putting the cheek rest on, be certain to remove the plastic film covering the 3M sticky tape so the cheek rest can adhere properly.  The magnets hold it in place but the tape secures them properly.

     

    Kindly 'Ol Uncle Hoot 

    Link

    Papy_Yosh
    Participant
    Member

    Thank you Hepotter,

    I am glad it works for you.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.