Previous

Suppressor for Benjamin Bulldog

Forums › PCP Airguns › Suppressor for Benjamin Bulldog

  • Views : 9248
    | Subscribe
  • March 4, 2017 at 5:40 pm Link

    TheLakeRat
    Participant
    Member

    Just thought I would share the new toy.

    March 4, 2017 at 7:18 pm Link

    addertooth
    Participant
    Member

    I look forward to the Pitbull goodies you will be making.  I have a Bulldog arriving in a couple days; it is unlikely to remain stock.  BTW, the Huma people hold you in high regards; that is quite an endorsement.

    March 4, 2017 at 7:35 pm Link

    Willie14228
    Participant
    Member

    Got mine in the mail today thanks lake rat it’s been raining so I hope to be able to take it out and test it tomorrow.
    From your video I can tell there is a huge drop in the reverb crack it will be very interesting

    March 4, 2017 at 9:52 pm Link

    TheLakeRat
    Participant
    Member

    Addertooth, Huub is awesome. He went out of his way to custom build the regulator for these rifles.

    Willie, hope it works well for you.
    It was raining here all day too or I would have been out shooting too.

    March 5, 2017 at 12:12 am Link

    Terryb00
    Participant
    Member

    How can we get these Pitbull ldcs?
    And are they pretty easy to install?
    Thanks,
    TerryB

    March 5, 2017 at 12:13 am Link

    TheLakeRat
    Participant
    Member

    [email protected]
    Takes me about 5 minutes to install one.

    March 5, 2017 at 6:19 am Link

    signal3
    Participant
    Member

    Beautiful work TheLakeRat!  Really want one as the only negative on the PB (for me) is the sound.  EM sent for shipping/pricing details.

     

     

    June 29, 2017 at 8:56 pm Link

    Joe Shooter
    Participant
    Member

    How do you guys like this? Custom cut factory shroud with custom made full barrel length barrel shroud LCD. This LCD kills the barrel report. I’m trying to figure out now how to kill the reservoir ping; it is really disturbing. Any suggestions?

    June 29, 2017 at 8:58 pm Link

    Joe Shooter
    Participant
    Member

     

    June 29, 2017 at 9:26 pm Link

    Imold
    Participant
    Member

    Havnt had mine long enough to really go over it but I like what I see,anyone know the price on that LCD of the top of your head?

     

    June 29, 2017 at 9:31 pm Link

    Imold
    Participant
    Member

    How long is that shroud Joey and how much will it be if you sell them?

    July 2, 2017 at 12:19 pm Link

    Joe Shooter
    Participant
    Member

    24″ from end to end, and the larger diameter LCD section is 10″. This is not my work, it was done by someone else.

    July 2, 2017 at 8:12 pm Link

    Imold
    Participant
    Member

    Ok thanks.

    July 4, 2017 at 4:13 am Link

    airgunmonkey
    Participant
    Member

    For the “ping”in the reservoir, install a regulator, it will take the “ping” away.

    July 4, 2017 at 8:48 pm Link

    Joe Shooter
    Participant
    Member

    Who makes a regulator that will fit in a Bulldog?

    July 4, 2017 at 11:19 pm Link

    TheLakeRat
    Participant
    Member

    Pitbull airguns will have them in a couple weeks. Watch the website and it will show when they are available.  Huma air made them custom for pitbull airguns and just waiting on them to clear customs now.

    July 5, 2017 at 10:20 am Link

    Joe Shooter
    Participant
    Member

    Fantastic!

    July 6, 2017 at 10:40 pm Link

    kkarmical
    Participant
    Member

    “JoeyCoco”How do you guys like this? Custom cut factory shroud with custom made full barrel length barrel shroud LCD. This LCD kills the barrel report. I’m trying to figure out now how to kill the reservoir ping; it is really disturbing. Any suggestions?

    That’s a hot looking bullpup, I like it a lot.  Who did the work for you?  Looks way better than the stock setup. 

    July 7, 2017 at 9:24 am Link

    TheLakeRat
    Participant
    Member

    That is a good looking gun. How does the stock hold up without the aluminum to hold it together in the front? does it get flimsy? I know the stock halves are flimsey when they are off he gun but once you put it all together it becomes very rigid. just wondering if that has any effect.

    July 7, 2017 at 9:46 am Link

    Terryb00
    Participant
    Member

    “JoeyCoco”How do you guys like this? Custom cut factory shroud with custom made full barrel length barrel shroud LCD. This LCD kills the barrel report. I’m trying to figure out now how to kill the reservoir ping; it is really disturbing. Any suggestions?

    
Hi Joey,
    I would really be interested if these mods become available. Looks way better and performs better than stock. Ask your friend,  please. 

  • Author
Viewing 20 posts - 1 through 20 (of 23 total)
1 2

You must be logged in to reply to this topic.