Stickman??

As far as I know there is no cure! ;-)

Should work tho there are other units at a much lower price that work well.

Maybe jump in the "airtanks, pumps & compressor" section of the forum & read around &/or post.





John

There are numerous guys on AGN using Stickman and it is QUALITY . The big gauge is dead on accurate and the hose is top notch . I have seen a number of cheap hoses bulge and that is scary. This is something you don't want to cut corners on. I use it and guys are always commenting on how much better it is then most others. They are great guys to call and spend the time required to answer your questions. https://airtanksplus.com/product/stikman-scba-pcp-fill-system/

I have one, and I am very happy with it. Top quality materials. My favorite feature is the male foster fitting with a check valve. I hook my Yong Heng compressor to that fitting, put a plug in the end of the fill hose, and then open the main tank valve. This lets the air begin flowing into the SCBA tank as soon as the compressor builds up enough pressure. I tried one of the cheap Chinese fill stations on Ebay, and it only lasted two uses. Yeah, it's a lot of money for something so small, but they tried very hard to make it well worth it, and I think it is.

I’ve been very happy with mine pricey but well made. Expecting many years of good service.

I like mine as well. Didn’t shop around, so I’m sure you could find a cheaper solution, but Stickman works and the guys are legit.

Stickman is a great products, cost a little more but it saved the hassle and headache.

A friend had a cheap one for Fleabay and it blew the hose at 2000 psi, replaced the hose and leaking at the o-ring at 2500 psi.

He end up with the Stickman and very happy with it.

I have no experience with anything else, but it is nice and easy to use, seems accurate, and is obviously quality built. Would I pay 200 bucks for another.. probably.

I just got one today and is very nice stuff would buy another yes and I love the extra port to connect hose too so not just banging around and keeps it clean plus the anodizing is top notch looking