Having fun stacking 22 cal JSB Jumbo Monsters (redesigned) 25.39 into a 2X6 at 20 yards with my Wildcat, until they come out the other side.
Stackin pellets
- Thread starter cootertwo
- Start date
Started tuning on my .177 wildcat a bit. Wanted to get a K rounds through it before messing with it but can't seem to wait. Turned the power down so it shoots the 10 grain at about 840 fps. Just for kicks ran a magazine if the redesigned heavies through it. Craziest thing you ever saw. You can see them good because they are so slow. They don't spiral, but will hook in any direction almost 6 inches at 50 yards. I feel another learning experiance coming on. Sylvan
Upvote 0
Way to go Sylvan. You are about to step into something I just discovered recently 
I bet I could make my WC shoot the 13 or 16 gr pellets now at a good speed that gives me good accuracy.. However, my problem with these two sizes is that they don't fit into the breech very well. I feel as though I have to sort of force the bolt closed. And I know it is probably just killing my o-ring.
Is there a "form" of the 13's or 16's that are smaller head size so they go in the breech without a hammer?
Crusher
I bet I could make my WC shoot the 13 or 16 gr pellets now at a good speed that gives me good accuracy.. However, my problem with these two sizes is that they don't fit into the breech very well. I feel as though I have to sort of force the bolt closed. And I know it is probably just killing my o-ring.Is there a "form" of the 13's or 16's that are smaller head size so they go in the breech without a hammer?
Crusher
Upvote 0
Have not found any of the heavier pellets that load in the breach right Crusher. Your right. Just makes you sick to load them. Sylvan
Upvote 0