Couldn't afford another gun, but I needed to buy a new toy (I love being single with grown children) so I got a Pro-Chrono DLX. All I have managed to do is get it set up and hook the ap up with an old tablet I found around the house. It seems to be working fine. While setting it up, I discovered that my Gamo Urban shoots the H&N Hornet at 798 to 800 across five shots, and the H&N Hunter Extremes at 744-748 across 5. (I'll have to get a full strings from a full fill later). I have yet to shoot the AF Texan .457 Carbine across it.
So now what? I have it, but only a vague idea about how to really use it. I know I can get an idea about how my non-regulated guns shoot across a fill. And I know that I can use it to see the results of adjusting the hammer spring. I've heard that most diabolo style pellets like it around the mid 800s, so I am assuming I adjust the hammer spring up on the gamo until I either get close to that with the 16 grain Hornets (what I hunt with most) get around that speed or the groups start spreading and then back off a little. Is that about right?
I think I can use it to see how the Texan reacts to different fill pressures. I know that with a full fill (actually 3400 not 3600) my second shot hits about a half inch higher than the first at 50 yards, so I am guessing there is some valve lock at the higher pressure with the 300 grain projectile - though I have my power wheel turned all the way up.
So now I can see the speed of my projectiles. Yay. What are some other ways you use your chronos to fine tune your guns?
So now what? I have it, but only a vague idea about how to really use it. I know I can get an idea about how my non-regulated guns shoot across a fill. And I know that I can use it to see the results of adjusting the hammer spring. I've heard that most diabolo style pellets like it around the mid 800s, so I am assuming I adjust the hammer spring up on the gamo until I either get close to that with the 16 grain Hornets (what I hunt with most) get around that speed or the groups start spreading and then back off a little. Is that about right?
I think I can use it to see how the Texan reacts to different fill pressures. I know that with a full fill (actually 3400 not 3600) my second shot hits about a half inch higher than the first at 50 yards, so I am guessing there is some valve lock at the higher pressure with the 300 grain projectile - though I have my power wheel turned all the way up.
So now I can see the speed of my projectiles. Yay. What are some other ways you use your chronos to fine tune your guns?