Smoothtwist X rifling
- Thread starter Michael
- Start date
Thanks for sharing! Can they be installed wrong if not careful? BTW it looks like a new liner? 
Upvote 0
Same one, I just cleaned it up. The o-rings are tricky to keep in place when reinserting the liner. I used a tiny bit of grease to help them slide in. Just take your time to twist & push the liner in (& of course make sure its pointing the correct direction).
Upvote 0
Hey
Any chance we could get a pic of the rifling? Very interested in seeing the interior of the smooth twist x barrel.
Any chance we could get a pic of the rifling? Very interested in seeing the interior of the smooth twist x barrel.
Upvote 0
IMO they should have done a shallow groove for the o ring. saving, ca-ching Kronas rolling
Time flies there will be the next IWA soon! I have the feeling the IWA is just a market research, no real products Kalibrgun is doing the same annoying
Sci-fi.
Time flies there will be the next IWA soon! I have the feeling the IWA is just a market research, no real products Kalibrgun is doing the same annoying
Sci-fi.
Upvote 0
Great pictures!
Can you post pictures of a pellet pushed through the barrel. The rifling seems very subtle. I wonder if the pellets slip through with a slower twist than the barrel like on smooth twist.
Can you post pictures of a pellet pushed through the barrel. The rifling seems very subtle. I wonder if the pellets slip through with a slower twist than the barrel like on smooth twist.
Upvote 0
And for those of you curious about indexing; the barrel cannot be indexed because it has a notch that lines up the transfer port, however the liner can be indexed. I suggest using an engraving pen to mark 12, 3, 6, 9 o'clock on the muzzle end of the liner.
Upvote 0