Tuning Slowing down my Leshiy .25

I just got a Leshiy and I love it. It’s completely stock as it came from AoA.

My question is about slowing it down some to get more shots per fill and maybe more energy transfer to the squirrels. Right now, it’s shooting 748fps and regulator is set at 120Bar. I’m shooting JSB Hades in .25 cal.

Can I just rotate the power (HST) a few clicks clockwise until I am getting my target speed of 675 FPS or is it more complicated than that?

431CBB37-4FDD-4F7D-95FF-A7FACCCB8434.1606697471.png
1AA2D643-7EC0-4BA8-9E4C-CF1AF26FB9F4.1606697474.jpeg

 
Yes, it's that simple. While it's always best to adjust the HST and regulator to give the optimum efficiency, you can get away with just adjusting the HST. Just remember that the HST adjustment on the Leshiy, R5, and R5M is the other way around because of its position on the gun. If you're looking at the HST from the barrel side, clockwise will decrease speed and counterclockwise will increase speed. For the amount that you want to reduce in FPS, you should be fine adjusting only HST. BTW, nice group! What distance?
 
I just got a Leshiy and I love it. It’s completely stock as it came from AoA.

My question is about slowing it down some to get more shots per fill and maybe more energy transfer to the squirrels. Right now, it’s shooting 748fps and regulator is set at 120Bar. I’m shooting JSB Hades in .25 cal.

Can I just rotate the power (HST) a few clicks clockwise until I am getting my target speed of 675 FPS or is it more complicated than that?

431CBB37-4FDD-4F7D-95FF-A7FACCCB8434.1606697471.png
1AA2D643-7EC0-4BA8-9E4C-CF1AF26FB9F4.1606697474.jpeg

How many shots are you getting with the factory tune? 
 
Thanks for the responses. I got to mess around with it some today. 3 clicks got me down to around 688 FPS. 4 clicks was around 650. I’m leaving it set for 688 and zeroed at 32 yds. That gives me a PBR from 11-36 yds assuming a squirrel head target (0.7”).

E71838F8-0072-440D-8ED9-C5A85A0AA25C.1606778436.png
F4E7A967-6820-4DC7-87C8-D6041CC28981.1606778436.png


1738472D-3E9F-42DA-9DDB-70916DBD25F6.1606778575.png


Accuracy was really good for me. 



1C6BFAE5-C613-4247-8C7C-3CA570BA694D.1606778614.jpeg
274C66A4-BA3E-4509-9E0C-FA78454AA1D7.1606778615.jpeg
71CCDEC5-8517-4E81-BF57-4B0F6380AD18.1606778615.jpeg
1C1656CD-B53B-457F-9EDB-D8F11003674A.1606778616.jpeg


That last picture is two pellets perfectly stacked. My backyard duct seal target isn’t so quiet when one pellet penetrates another.