Silencer for a tx200hc

Contact donny he can usually help.

https://donnyfl.com/

Yes you need to visit donnyfl page, he has the #A21 doble male 1/2x20 adapter, and then you choose whatever silencer you prefer, but just a tip, it´s a springer so don't expect to much silence as the noise comes from the action when shooting not the muzzle. Hope it helps.

Regards

Is the Tanto from DonnyFL the recommendation for the TX200HC? Follow-up, DonnyFL says no for springers on anything they make. Not the right material to hold up to the way springers work. So is the AA made silencer the only option?

AoA did not repeat DonnyFL's opinion on moderators/silencers for springers. So hopefully going with the 0dB Airgun Silencer 110C soon.

chickendumpling said:

Is the Tanto from DonnyFL the recommendation for the TX200HC? Follow-up, DonnyFL says no for springers on anything they make. Not the right material to hold up to the way springers work. So is the AA made silencer the only option?

AoA did not repeat DonnyFL's opinion on moderators/silencers for springers. So hopefully going with the 0dB Airgun Silencer 110C soon.

Click to expand...

I think you’re going to find that spring guns are not really suited to moderator use. Look around, most spring guns are sold without moderators. There are a few, but most of those are low end junky guns that rely on new buyers who are just starting out and know next to nothing about airguns.

Let me give you a bit of unsolicited advice. Save your money and buy a moderator when you have a PCP that can actually take advantage it. Most of the sound coming from your TX200 HC is mechanical unless the gun is dieseling because of lubricant in the compression chamber, and even then, that will eventually come to an end.

phillip said:

I think you’re going to find that spring guns are not really suited to moderator use. Look around, most spring guns are sold without moderators. There are a few, but most of those are low end junky guns that rely on new buyers who are just starting out and know next to nothing about airguns.

Let me give you a bit of unsolicited advice. Save your money and buy a moderator when you have a PCP that can actually take advantage it. Most of the sound coming from your TX200 HC is mechanical unless the gun is dieseling because of lubricant in the compression chamber, and even then, that will eventually come to an end.

Click to expand...

HWs had / have moderators. Enjoyed one on my HW77K ... AoA offers for other HW's break barrels as well. HW97K has something on the end too. The TX200, I believe has a built in moderator. The TX200HC has specific feature to allow a moderator. So I'm not following your suggestion. Although, most low end springers had NO option for moderators during my exploration into those. Just did not have the same experiences I suppose, thus, that is why I'm looking to have one again on a springer.

Do what you think is best for you . This is your hobby