Sideshot /MKII magazine

Jump to latest Follow Reply
Hobbyman2007

Hobbyman2007

Member
Nov 17, 2015
608
19
Ontario, Canada
I received and fitted my new sideshot magazine the other day , and today while going through it and figuring it out I thought I’d try to see what the longest pellet would fit . To my surprise , even the 225-39FN bullets fit with just a slight bit of room to spare . They measure at.410 “and everything cycles just fine . This is quite a bit deeper than the factory mags pre MKII . Good news for the slug shooters . Now to size these down to see if they work in the barrel. If anyone was holding off due to the short depth of the mags the MKII will take up to 40 gn . Now to get the power up to launch these to 900+ FPS.
 
Yep it’s a .22 cal. I ordered the mag from Airgun source here in Canada. Both the clear cover and base have milled depressions in them . I’ll see if I can post some pics . Bob , I think the VK ‘s are a bit longer due to the nose profile . This is what I’ll be shooting http://noebulletmolds.com/NV/product_info.php?cPath=24_117&products_id=1660&osCsid=e5ma2vgvvf4ldka3npbc7olur6

I have a second mold getting decked down to .355” so they’ll fit the factory mags and reduce the weight a bit . I do have to size them down in two steps to get them to .218” other wise the bases tend to deform . I should also mention they are extremely accurate from a 1:15.5” twist Evanix .
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu