Set up for comments and criticism

looks good! What do you use to keep it cool?

Click to expand...

Sonny, i missed your comments. I am using a 3 gallon of tap water with ice 

Your setup is very nice, thank you for sharing the images with us. Good job too keeping the filter above the fill tank, and the tank upright during filling, so any condensate in the line runs back towards the bleed valve.

Click to expand...

LMNOP, 

i was thinking about your comments. I had to double check because if i decompress the air from the big gold towards the bleed valve, the condensed air or water will pass thru the desiccant. This is prone to condensation. The best way should be to have a bleed valve in the big gold or a bleed valve between the one way valve and the big gold to prevent bleeding air thru the desiccant. Today, it looks like the desiccant got condensation . 

Update and upgrade just to kill the boredom during the pandemic. One cigarette like filter and desiccant filter plus 300 bar auto bleeder (not burst disc). I just added one-way valve at the air intake.



The issue with this is the bleeder screw is where the air, water and oil are release. Your hands get soak with water when you slowly bleed it.

The final setup is in the making. The assembly is more exciting than the actual use. They call it addiction.