Seneca Aspen/Nova Freedom parts list

PM me, I have it

Hello, I would like to have that list, My Seneca Aspen is messed up, I need to fix it myself, would you like to give me that link to parts list ? Thank you in advance. 

Yes sir, It worked ! Thank you very much. I will try to disassemble the pellet probe mechanism and order that part, I don't have an idea who sells those parts though. I 'll keep searching for parts. Thanks.

My Seneca Aspen PCP had an O-ring about the size of a dime fall out of the hand pump mechanism "area" (I think) while pumping today. Any idea which one it is? It's cut or sheared cleanly as if a pair of scissors cut it. The O-ring is well lubricated - likely from my recent drop of lubricant that came with the gun on the hole about midpoint in the pump cylinder where I can still see that O-ring I targeted with oil is in place. The gun pumps normally and shoots normally with no abnormal noises - yet, 3 shots after discovering the cut O-ring that fell out. I was holding the gun with the butt of the stock on the floor and the barrel vertical with the hand pump arm extended when the O-ring fell from ~mid-rifle to the floor near the butt of the stock.



I'm looking at the part list from the above link and it's not obvious so far Any suggestions would be greatly appreciated..

THANK YOU BRO !

I WAS TRYING TO PUSH A PELLET THRU WHEN THAT WEAK CONNECTING ARM THAT CONNECTS THE HANDLE TO THE PELLET PROBE BENT AND FINALLY BROKE .I GUESS IT CAN BE MADE YOURSELF . DID YOU FIND OUT WHO SELLS ANY PARTS YET ? I PLAN ON PUTTING A STRONGER HAMMER SPRING OR MAYBE SOME WASHERS BEHIND IT TI STIFFEN IT UP ALSO WHEN I FIX THIS PROBLEM . ALSO THINKING OF WIDENING THE EXHAUST HOLE TO ALLOW MORE AIR TO PUSH THE PELLET . FIRST TROUBLE I HAD WITH MY FREEDOM IN OVER 3 YRS ! OH AND THINK ABOUT PUTTING A AIR STRIPPER ON IT .MINE WAS FROM A .22 UMAREX GAUNTLET , PERFECT FIT ! 

Is it anyone out there that I can pay to fix my nova freedom 22/cal and how much will the service

I will pay shipping there and back

Is it anyone out there that I can pay to fix my nova freedom 22/cal

I just took aprt my nova freedom. 22 - I ordered the 006 seals for the piston seal. Does anyone know if any other seals seem to go bad in this gun and does any company offer a complete new better seal kit for this air rifle ? Ty

Heres some photos.

Heres photo of the bad piston seal...its the small black seal to the right . .

Also, it took me a while to figure out how to get to that thin rod where the piston seal is located.

This version of the rifle, has a threaded brass piece that fits into the larger outer tube. That brass piece screws out, but it is recessed and doesnt have any notches to screw it out. I finally got it out and drill 2 small holes in the top of it, so it is now easy to put bac kin and take out again if needed.

here is the seals I bought to replace the single black piston seal. Im hoping I rodered the right seal and from what Ive read, its best to install 2 seals onto the piston rod ? This seal has a higher hardness rating so hopefully it last much longer. I like the concept and accuracy amnd power of this air rifle alot, so I want to try and repair /improve it.

I still dont know if I should replace any other seals and how hard it would be to purchase all new , better hardness seals for it.

ididdat32212 said:

Is it anyone out there that I can pay to fix my nova freedom 22/cal

Click to expand...

Try this thread on how to do it at home. It took me a while but eventually got it down. I pumped the thing hard at first and had to replace that o ring quite a few times. You’ll want to learn how to do it imo

sticman77 said:

Try this thread on how to do it at home. It took me a while but eventually got it down. I pumped the thing hard at first and had to replace that o ring quite a few times. You’ll want to learn how to do it imo

Click to expand...

did you only have to replace the small piston seal ?

Yes. Sorry looks like I forgot to post the link - https://www.airgunnation.com/thread...aspen-nova-freedom-pump-repair-photos.448057/

The original orings are dire
I used green buna rings with zero problems.
The pump however will keep failing at some point" it's the guns Achilles heal
Great concept though.
I removed pump completely and added a bottle instead.
Very accurate gun for a budget rifle