I am trying out a Sekhmet gauge on the regulator side of my Impact II. It registers reg. pressure but not average bar per shot, shots left and all of that. Will this not work on this end? Does it have to be on the main bottle to give this info? Seems that might be the case as the pressure in the plenum remains pretty much constant.
Sekhmet Gauge Question
- Thread starter Drumsnguns
- Start date
It isn't able to register that info if it's on the reg side since it's only reading the plenum. If you want shot count and such it needs to read off the main air source.
Upvote 0
Is everyone still loving these SEKHMET digital gauges? I am looking hard at them. Also, what is the correct thread type to get for an Impact II? Thanks!
Upvote 0
1/8bspp. LOVE them, and I've used Wika (best analog around) and Edmu also. Sekhmet is best.
Upvote 0
I just got a couple . . . definitely very well made compared to the EDMU. Interface isn't the most intuitive I've seen but you get used to it relatively quickly. The info provided is useful but I still have the same question I had when using the EDMU on my Edguns: will I really need this info that much? I'm not sure yet if the extra steps of having to turn it on each time to get a reading and having to recharge it (or the constant replacement of batteries in the case of the EDMU) don't outweigh the benefits of a digital gauge.
But build quality wise, it is a very solid piece.
But build quality wise, it is a very solid piece.
Upvote 0
Thank you...Sorry, I remembered asking the thread size before, but forgot I had wrote the info down. My FX gauges are actually reading correctly, but it's hard to pinpoint the reg setting precisely.
Upvote 0
Still liking mine. I have one on the reg did and like pinpoint pressure settings I can get with this little gadget!
Upvote 0
I'm considering taking the Reg 2 gauge (Wika) on the Impact M3, putting it where the Reg 1 gauge is (FX), and putting a Sekhmet where Reg 2 was.
Upvote 0