SOLVED!! Scope ring interference with using Side-Shot scope cam mount.

Forums Optics, Scopes, Rings, & Mounts SOLVED!! Scope ring interference with using Side-Shot scope cam mount.

  • Views : 309
  • Link

    Duanen
    Participant
    Member

    Has anyone had their scope ring interfere with the slide in shaft of the Side-Shot camera mount. Mine is causing the camera cross hair  to be canted. I could cut off the shaft end that is hitting the ring. I have a one inch tube and rather buy new rings. Anyone using the FX ajustable rings with your Side-Shot? How about posting what you are using? I'd really appreciate it.

    Link

    NoLandBeyond
    Participant
    Member

    Here's what I learned to fix the problem. First, I had to flip my scope rings so that the screws are facing the right side of the rifle, not the left side. Second, once that's done, go ahead and lightly tighten up the ring clamp and make sure the silver screws that are included are also on the right side of the gun. Then mount your phone and slowly twist the Side-Shot ring clamp until the crosshairs straighten out. Then tighten down the ring clamp and you're done.

    Link

    Duanen
    Participant
    Member

    Thank you NoLandBeyond!! This did the trick. I now have centered and leveled cross hairs.

     

    Thanks again!!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.