Saber tactical bottle clamp

Why not just use the extension of the trigger guard that's already provided? I use it on both of my Impacts and it works like a charm.

Regarding the clamp on the high pressure bottle, though, I wouldn't worry about it. In fact, I may very well put one on my newly acquired Daystate Wolverine. Remember, most of these airguns are meant to be outdoor tools that can withstand the rigors of hunting. The very small stress that the clamp may impart to the bottle will, I believe, be negligible.

I do have one on my impact and work well. It doesn’t require a tight fit, the rubber liner between clamp and bottle grips well. My only complaint would be that the barrel is easier to remove to turn than removing the clamp. The barrel has one bolt and the clamp has three.

Hi everyone. 

What are your thoughts? I need something for my Impact mk2.I am a little worried about putting stress on high presure bottle.

I don't like the looks of extended rail and price is also to much.

Regards Marko

Click to expand...

got a few Saber Tactical, cero issues, nothing to worry about, go for it

I use the bottle clamp to mount bipod on gun where there is no other alternative, works very well. I don’t put a lot of pressure on it shooting from bench or off of truck, I definitely wouldn’t lean on it too hard.

I used a bottle clamp with zero issues on my Red Wolf. I don’t believe there should be a worry about pressure on the bottle. Look how many of these rifles are made with no protection under the bottle and they know many people shoot off bags and sticks. I think if there were issues, then manufacturers would put things in place to limit their liability.

You could also try a pic rail extender. Won’t get out as far, but would be the cheapest option. CCut has a picture of one in his Delta Wolf post from last night.