Rx2 sometimes won't cock

josh3rd · Dec 26, 2021

When I go to cock my rx2 sometimes, it won't cock. Not until I depress the safety. It only happens sometimes but it shouldn't happen nonetheless. Any ideas as to why? And I'm pretty sure that the trigger guard and such are installed correctly because I wouldn't be able to put the safety on or off nor would I be able to pull the trigger

Simplyhooked · Dec 26, 2021

Is it possible that your trigger is set too light, you may want to start there, it's just a thought.

JayJay · Jan 3, 2022

Very interesting. I saw the same thing recently when reassembling my HW90. The barrel would pull all the way back but the piston latch would not engage. It was eerie.

What fixed it was removing and reinstalling the trigger guard/safety assembly. I was extra careful to fully seat it in the stock before tightening things up.

Bear-of-Grayling · Jan 4, 2022

I have seen this before. The safety latch and spring is loaded with factory grease when manufactured. After time the grease dries out and gets firm. This does not allow the safety to return in its correct position. Remove the safety and spring. Clean out the old grease from the safety, spring and well and apply a bit of new.

josh3rd · Jan 4, 2022

Thanks to all of you guys for your feedback

Search

Search

Rx2 sometimes won't cock

josh3rd

Member

Simplyhooked

Member

JayJay

Member

Bear-of-Grayling

Member

josh3rd

Member