Update from this end:
All -- I've got a new reg inbound from AOA via Mr. Rob @RTI. ( they must have some sort of agreement where RTI reimburses AOA for every item they ship out under warranty or something? AOA ain't sending out reg's for free . . . . )
@scotty1 -- hows it holding up?
All -- I did (more or less) what @davecole said he did with his. With my bottle filled to 260'ish, I started upping the reg 5-10 bar at a pop and then dry firing it at each of those 5-10 bar adjustments. 140 -->150, dry fire 2 or 3 times, 150 --> 160, dry fire 2, 3 times, etc .... up to a little over 200 bar. Then I walked it back down the same way -- 200 -->190, dry fire x2, 190 -->180, dry fire 2x . . . I meant to walk it back down to my starting point @140 but I overcooked it and it wound up at around 110. I turned it back up to 140 and dry fired it several times to verify that's where it was - giving it 10 seconds or so between shots to settle - and when it appeared to in fact be @140 I bagged it for the evening. That was 3 or 4 days ago and I've (actually) been shooting it at some of my farm permissions - it's holding.
This leaves me in a conundrum - I have a new one inbound . . . hopefully it *is* better, assuming a newer model than the OEM one I have. Hopefully it has the new internals like @scotty1's - they're sending me the entire reg - not just the internals. Prior to doing the @davecole ( hey - it's like a gymnastics move - you have something named after you now - lol!
) it wasn't holding a set point for more than a couple of hours - it was constantly creeping. ( knock on wood ) As mentioned above - it's been holding, rock solid no less, for 4 days now.
All -- I've got a new reg inbound from AOA via Mr. Rob @RTI. ( they must have some sort of agreement where RTI reimburses AOA for every item they ship out under warranty or something? AOA ain't sending out reg's for free . . . . )
@scotty1 -- hows it holding up?
All -- I did (more or less) what @davecole said he did with his. With my bottle filled to 260'ish, I started upping the reg 5-10 bar at a pop and then dry firing it at each of those 5-10 bar adjustments. 140 -->150, dry fire 2 or 3 times, 150 --> 160, dry fire 2, 3 times, etc .... up to a little over 200 bar. Then I walked it back down the same way -- 200 -->190, dry fire x2, 190 -->180, dry fire 2x . . . I meant to walk it back down to my starting point @140 but I overcooked it and it wound up at around 110. I turned it back up to 140 and dry fired it several times to verify that's where it was - giving it 10 seconds or so between shots to settle - and when it appeared to in fact be @140 I bagged it for the evening. That was 3 or 4 days ago and I've (actually) been shooting it at some of my farm permissions - it's holding.
This leaves me in a conundrum - I have a new one inbound . . . hopefully it *is* better, assuming a newer model than the OEM one I have. Hopefully it has the new internals like @scotty1's - they're sending me the entire reg - not just the internals. Prior to doing the @davecole ( hey - it's like a gymnastics move - you have something named after you now - lol!
) it wasn't holding a set point for more than a couple of hours - it was constantly creeping. ( knock on wood ) As mentioned above - it's been holding, rock solid no less, for 4 days now. Upvote 0
