Rocker 1 ldc s

1537494130_2281158095ba44c725cb2e3.32342963_IMG_0205.JPG
for anyone on the fence about ordering one of rocker 1 s ldc s I can honestly say go for it !! 

David is a great guy and builds a very nice product for a fair price and he is very happy to stand behind his products 

I just ordered two stormrider ldc s from him and when they arrived I found that one of them would not slide all the way onto the recess at the end of my barell the other was a perfect fit. One call to david to make him aware of the issue and without even questioning me over it he said I will just send you another one don't even worry about it I offered to send the other one back to him and he refused to let me do that he just told me I will do whatever I need to to make it right I can assure you 

very impressive customer service in my opinion kudos to you david your truly a stand up guy !! 

On a side note after a quick look at the issue I found that the mounting collet had two small burrs inside the mounting hole of the aluminum collet 

a few minutes with some semi fine sandpaper taped to a small torx driver and I solved the issue with minimal effort 

if your looking for an ldc I can definatly recommend rocker 1 and his products you surely won't be disappointed !! 

Here is one of rocker 1 s ldc s on my .22 stormrider I also have one on my Maximus hunter and both work awesome 

If u have any questions about his products u can find him on the gta forum or email him at [email protected]



Happy shooting 

pcpfan37




 
 

I removed the barell from the rifle

cut a 3 in wide by about 12 in long piece of cardboard and folded it into a v lengthwise then clamped the barell in a vise with the cardboard around the outside of the barell then took a die grinder with a skinny blade on it and cut a slot lengthwise into the Oem ldc 

the ldc finally got hot enough it melted the adhesive and it just pulled off

Might not be the easiest way to do it but it worked for me 

if u have a heat gun you can just remove the set screw from the oem ldc and heat it up until you melt the adhesive but you will need to get it fairly hot so don't give up until you get it loose It will come loose eventually 

pcpfan37