Hi Guys
Thinking about changing FX Crown gauges , both gun gauges reg and reservoir. Any ideas ?
safe shooting
Thinking about changing FX Crown gauges , both gun gauges reg and reservoir. Any ideas ?
safe shooting
Replacing Crown gauges
- Thread starter wolfie
- Start date
Are yours off? I was just looking at the Edgun digital gauge and wondering if those would fit the stock holes and not be too tall. I like the FX because of the detailed bar incrementing. Keep us posted, If your not sure if yours are correct I'd be glad to check them against my Crystal test gauge which is within 1.5bar at 150bar.
Jimmy
Jimmy
Upvote 0
I know the Edgun gauge is the same size as the ones on the Impact and by eye the crown and impact gauges look to be the same.
Upvote 0
The Edgun gauge is the same as Wika gauge
Both these gauges are larger than the stock fx gauge.
The Edgun gauge defo won’t fit the Crown . Even if you enlarged the hole in the stock you will cover the access point for the adjustable regulator.
Upvote 0
I just measured the Edgun gauge it’s 1.07 in in diameter the hole for the existing impact gauge is 1.036 so you would have to ream it out by .034 inches so I would agree that if you did it for the gauge that shows tank pressure it would block the regulator adjustment screw. But for the few times you need to adjust that gauge it’s can be reached by removing the stock. So it can be done but you will probably need to remove Stock when adjusting regulator
AirkSupply
The Edgun gauge is the same as Wika gauge
Both these gauges are larger than the stock fx gauge.
The Edgun gauge defo won’t fit the Crown . Even if you enlarged the hole in the stock you will cover the access point for the adjustable regulator.
Upvote 0
Hi
Are the Edgun gauges stable and accurate? Think if reg gauge would fit Crown that might be an option. Would put up with bottle pressure gauge Somebody mentioned EdMu gauges?
safe shooting
Are the Edgun gauges stable and accurate? Think if reg gauge would fit Crown that might be an option. Would put up with bottle pressure gauge Somebody mentioned EdMu gauges?
safe shooting
Upvote 0
They are very accurate there is a learning curve to get used to them. Edmu is just another name for the electronic gauges made by Edgun.
Upvote 0
Thankyou All
Curious though how a reg gauge can be stable if tapping it changes reading.
Re reservoir I can check against my fill bottles where I know their accuracy. Dive station use very high quality digital so both my bottle gauges marked eg + /- 10 bar etc.
I will ask dive centre whether they can check gauge . Are the Crown gauges adjustable?
safe shooting
Curious though how a reg gauge can be stable if tapping it changes reading.
Re reservoir I can check against my fill bottles where I know their accuracy. Dive station use very high quality digital so both my bottle gauges marked eg + /- 10 bar etc.
I will ask dive centre whether they can check gauge . Are the Crown gauges adjustable?
safe shooting
Upvote 0
Did anyone ever try to put the Edumu into their Crown? If so, how did it go? I am thinking about doing it.
Upvote 0
Huma-air gauges work like a Swiss watch!
https://www.huma-air.com/Fx-Crown-replacement-pressure-gauge
https://www.huma-air.com/Fx-Crown-replacement-pressure-gauge
Upvote 0
I replaced the pressure gauge on my Vulcan (it was heavily wrong .... it marked 300 bar, when in reality there was 250 bar of pressure inside the tank), with a Huma pressure gauge. Perfect and precise. Cost 15 € plus 6 € shipping costs (Holland / Italy). I am also considering whether to replace my Crown's standard gauges with 2 HUNA gauges.
Upvote 0