raw air guns? accuracy and quality
- Thread starter aa_limited
- Start date
No, Mike will make a 22cal as well. I didn't ask about 20cal and haven't seen/heard of one. He does not go larger than 22cal and has zero plans to, that I did ask.
Upvote 0
I have 2, a TM & BM they are in my opinion the highest quality most accurate airguns you can buy period! But the most important aspect of owning one is the service before and after the sale!, SANDRA & MARTIN HAVE THERE poop TOGETHER... buy one you'll see for yourself.
Upvote 0
What about the noise level of the RAW .30 PCPs? Are they backyard friendly?
I have an FX Royale 500 in .25, if anyone can make a comparison of sound levels....
I have an FX Royale 500 in .25, if anyone can make a comparison of sound levels....
Upvote 0
My TM-1000 in.177 has the carbon fibre silencer/shroud & is very very quite! Definitely back yard friendly!
Upvote 0
I purchased an HM100x in .25 it was sent straight to Alan Zasadney to be gone through and setup.
Do the same, never look back, and shoot-shoot-shoot when you are out shooting it you win!
Do the same, never look back, and shoot-shoot-shoot when you are out shooting it you win!
Upvote 0
Just ordered an in stock HM1000X .30 with pepper laminate Sporter stock! Should get it this coming week I can't wait! All this talk about them and I just couldn't help myself. Sold off most my guns just for this one and if I enjoy it like I think I will will probably be ordering a HM1000X .25 down the road.
Upvote 0
Did you order direct from RAW or elsewhere? I'd like to order a .25 sporter as well.
Thanks
Thanks
Upvote 0
I am waiting for my LRT .25. I ordered it 10 weeks a go. The waiting list was 12 weeks approximately. I have to imagine with the holidays it will be a bit longer. I'm eager to get my hands on one. Every airgun I have bought I have never seen one in person. Somewhat of a gamble. Holding and seeing a gun is different than seeing a picture. This is why this forum is so valuable to me. Sometimes I wonder how we used to do it. Magazines seemed to be the only information available. Even magazines were often not reliable because of advertising bias.
Upvote 0
I had an early TM1000 and thoroughly enjoyed it. For field target I have come to prefer an aluminum adjustable stock like on the FT converted 10m guns or the Thomas. I think the TM1000 is plenty precise for FT and is a great all around gun.
Upvote 0
You can argue RAW vs Thomas, but as someone said, the nut behind the trigger makes it work. Personally, I prefer RAW. I have three of them in .177 and .30. The top dog in customer support unquestionably is Martin Rutterford of RAW.
Upvote 0
What does this service do to the rifle?
And how much does it cost?
I was thinking RAW would just set up their rifles when they are built....
Upvote 0
HM 1000X .25 owner..... It's the best pcp for me, accurate, reliable, quiet, nice stock finish, balance, excellent regulator, all rifles are assembled by hand.... No rifle leaves the factory without the approval of his engineer and owner!!
i have also a edgun matador and fx impact, both of them in .25, love my 3 pcp's but if I have to choose one, it will be the RAW.
i have also a edgun matador and fx impact, both of them in .25, love my 3 pcp's but if I have to choose one, it will be the RAW.
Upvote 0
Dirte,
you will open the box and be very pleased. Not sure what color you went with but you'll be happy.
you will open the box and be very pleased. Not sure what color you went with but you'll be happy.
Upvote 0
I hope so. I payed for a walnut upgrade. They said they would try depending on how the wood turns out after the cut. I never have been a fan of laminates. Although from what RAW has to offer for colors they may have changed my mind. Yours looks awesome Scott!
Upvote 0
yes i was wondering how much a walnut up grade costs? does any one know?
dirte what gun and stock did you buy? and cal?
dirte what gun and stock did you buy? and cal?
Upvote 0
Can't wait to see how yours turns out Dirte! My .30 should be coming tomorrow if the weather cooperates.
Upvote 0