Pending HOW LONG you have had the rifle ? The poppet and seat design had a rework @ Jan/Feb of 2020. If yours predates this you need to get the new poppet and seat from JSAR and change it out.
If gun is only a month or so old ... likely the poppet needs to only be spun against the seat a couple time to better burnish it in. ( valve has to be out of gun to do this using a cordless drill to spin the poppet stem while applying pull back pressure against the seat.
Hey Scott, is there any way to differentiate between old and new?
Original design used a concave seat that pressed down into the valves internal bore with an o-ring around it. Poppet on sealing surface cut 90* to the stem ( Flat )
The new seat sits on top of the o-ring and has a flat sealing surface. Poppet looks similar tho now has a tapered angle to center within the seat and cut at @ 30*