RAPID AIR WEAPONS AND HUMA

AZUARO, I understood your message very well, thank you very much your explanations are very precise.

DIANK

I noticed that the huma reg made for the RAW's has a larger volume, meaning same velocities with lower pressure. Does this mean higher shot count then? 

The huma is quite a bit smaller than the raws probably a inch or so shorter if you empty the gun and remove the bottom blanking plug the raw protrudes almost all the way over top of the hole the huma is all contained into the housing and leaves that hole open when I added external plenum and huma so external plenum has straight flow to the valve 

So there is an option to get a larger plenum for the rifle?

So there is an option to get a larger plenum for the rifle?

Click to expand...

Yes I use external plenum on my RAW HM1000X guns and I sent Airgunmann the plenum across two ponds .

https://www.airgunnation.com/topic/raw-hm1000x-25-further-upgradations-with-new-technology-of-fx/?referrer=1

https://youtu.be/zGjDG_9qGO4

https://youtu.be/12pg13RM4U4



Bhaur 

Is there a way to install it. In-line with the bottle instead of perpendicular? I have the newer model with the metal m-lok rail all along the whole foregrip.

Is there a way to install it. In-line with the bottle instead of perpendicular? I have the newer model with the metal m-lok rail all along the whole foregrip.

Click to expand...

Looks like there is not much space along the cylinder for good sized plenum. 

Bhaur 

No there isn't I have the chassis on my pre air force and fitted it threw the bottom of it like mubhaur my chassis if off getting painted or dura coated right now though 

Yes thanks mubhaur for plenum again and it's definitely a quality piece