Rail for b10 atlas bipod

Forums General Discussion Rail for b10 atlas bipod

  • Views : 504
  • Link

    Micbro
    Participant
    Member

    Hi guys. I’ve just bought an atlas bipod (the one without the quick release) and I want to fit it to my bobcat. I’m in the uk and I’m having trouble finding the atlas picatinny rail recommended by Ted. There are two retailers who sell them over here but neither have them in stock! Can anyone suggest an alternative rail as I’m not sure which ones will be compatible with my gun and bipod. Any advice would be greatly appreciated.

    Link

    Kitplanenut
    Participant
    Member

    Go to any gun store that sells AR parts. They make rails for AR’s in different lengths and the short one is the same length as the  one AOA sells for the Atlas bipod. It is just slightly more squared off on the ends. They are cheap. Holes are the same spacing. I doubt you will be able to tell once its installed. If you don’t like it you can always replace it with the one you want when it’s available. 

    Link

    travels4fun
    Participant
    Member

    “Micbro”Hi guys. I’ve just bought an atlas bipod (the one without the quick release) and I want to fit it to my bobcat. I’m in the uk and I’m having trouble finding the atlas picatinny rail recommended by Ted. There are two retailers who sell them over here but neither have them in stock! Can anyone suggest an alternative rail as I’m not sure which ones will be compatible with my gun and bipod. Any advice would be greatly appreciated.

    
Try the Netherlands. Luchtbucks carries Atlas bipods and rails.
    BT15 3.35″ 1913 Rail: http://luchtbuks.com/en/adapter-bt-15-atlas-bipod € 39,50
    BT1517 Rail Mounting Fastener Set: http://luchtbuks.com/en/atlas-rail-schroefklauwset-bt1517 € 6,95

    Link

    Micbro
    Participant
    Member

    Wow you found the screws as well, that was going to be my next question! Thanks travel4fun, really nice of you to take time to help out.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.