Quick and easy field tuning - FX Impact

Thanks Bob. 

Nice video Bob, thanks for the video. I am trying to understand your Min setting thing, though. Did you turn the wheel to Min and then tighten the hammer spring all the way? Now, do you ever adjust the power wheel to say, 5, 4, etc. Can you even rotate it to a higher setting or do you just leave it at Min? I have an Impact X .25 bought in Aug, 2018 without any modifications. I shoot JSB's 33.4g and don't think that I would be able to get that power as you at that Reg setting. My gauges are way off anyway.

Thanks, stay safe.

Thanks for the video Bob, I'd say that's the down and dirty of it.. Have you found that zeroing at 35 and validating at 100yds is good enough most of the time. Do you ever shoot some the the distances that you marked and found them to be low or high enough to cause concern? As far as your Strelok settings what would you say are the three or four most important inputs that have to be near 100% correct and which ones don't seem to matter much? Just reply when you get time, no hurry and happy hunting. 

Jking

Now that's a useful how to video. Thanks Bob.

Thank You Bob!

A sequential process I can understand. Nicely done.