Question to the 25 cal Marauder folks that are regulated
Forums › PCP Airguns › Question to the 25 cal Marauder folks that are regulated
-
Views : 380 Likes : 0Likes : 0
-
May 29, 2019 at 3:17 pm Link
I’m curious to know your regulator BAR settings for high shot count, such as the 40/40 tune, and regulator settings for all out high FPS power. Shot count on the high power would be beneficial to my inquiry, along with pellet type/weight.
As an example, at 148 BAR, my pressure gage had 2150psi on a full 3000 psi fill. I was able to achieve that 40/40 tune with average speeds in the 845’s.
My intent for this inquiry is to know if any of you have increased pressures on your regs above 150 BAR.
thanks, all
I’m curious to know your regulator BAR settings for high shot count, such as the 40/40 tune, and regulator settings for all out high FPS power. Shot count on the high power would be beneficial to my inquiry, along with pellet type/weight.
As an example, at 148 BAR, my pressure gage had 2150psi on a full 3000 psi fill. I was able to achieve that 40/40 tune with average speeds in the 845’s.
My intent for this inquiry is to know if any of you have increased pressures on your regs above 150 BAR.
thanks, all
May 29, 2019 at 3:20 pm LinkOh, and all things considered, I’m not going to get into larger transfer ports, modified valves, etc., as I’m highly assuming with a regulator in place and for how long these marauders have been out, all those air flow enhancements have already been addressed. Just wanting to hear about reg pressure settings
Oh, and all things considered, I’m not going to get into larger transfer ports, modified valves, etc., as I’m highly assuming with a regulator in place and for how long these marauders have been out, all those air flow enhancements have already been addressed. Just wanting to hear about reg pressure settings
May 29, 2019 at 8:38 pm Link135 bar for me makes 60~ FPE with mkll's, and easily gets over 40 shots on a fill @ 40 fpe…but that is far from stock.
-Matt
135 bar for me makes 60~ FPE with mkll's, and easily gets over 40 shots on a fill @ 40 fpe...but that is far from stock.
-Matt
May 30, 2019 at 12:24 am LinkMy regulator is set to 1800 PSI (actual), although the numbers on the HUMA regulator are slightly off. It is a 42 shots at 40 FPE with about 18fps difference between the fastest and slowest shots in the 42 shot string. 0.1875 porting throughout.
My regulator is set to 1800 PSI (actual), although the numbers on the HUMA regulator are slightly off. It is a 42 shots at 40 FPE with about 18fps difference between the fastest and slowest shots in the 42 shot string. 0.1875 porting throughout.
June 1, 2019 at 12:24 pm LinkAddertooth and Matt, thanks for the input.
Yeah, Matt, your gun doesn’t qualify in this tread, lol, that thing is crazy sweet with all you’ve done to it. What I’m most envious on is the weight of your marauder.
Addertooth and Matt, thanks for the input.
Yeah, Matt, your gun doesn’t qualify in this tread, lol, that thing is crazy sweet with all you’ve done to it. What I’m most envious on is the weight of your marauder.
-
Author
You must be logged in to reply to this topic.
