Puncher breaker silent efficiency. New setup pics!

Forums PCP Airguns Puncher breaker silent efficiency. New setup pics!

  • Views : 1567
  • Link

    sevnofspades
    Participant
    Member

    So fellow breakers, what are you getting off a 200 bar fill?  .22 and .25?  I just bought this setup, and just trying to further educate myself .

    Thanks!

    Link

    JimNM
    Participant
    Member

    3 full mags, plus a few before I start to see a change in poi. In those first 36 shot,  ES of 30 FPS and SD of 5.

    ..22 at 28.5 grain

    36 FPE

     

     

    Link

    Polyphemus21
    Participant
    Member

    About 40'good shots at full power in .22.  Lots more at about half power setting and it still hits plenty hard at around 30 yards.  Killed a rat in yhe backyard first night out ?  This one was tuned by Troy Hammer at Annihilator Airguns.  Takes a while but he does great work.  It has a 12 power Mantis pn it on it now.

     

     

     

    Link

    Polyphemus21
    Participant
    Member

    BTW, awesome looking Breaker!

    Link

    WickedPlinka
    Participant
    Member

    Welcome to the puncher broken club.

    Pardon my sarcasm, but I just heard the ping of another broken stem while missing an easy target.

    With my hammer spring backed way out, reg set to 135bar and the transfer ported and polished it still breaks stems like crazy. 

    But when it works and I do my part it will put 40+ 18.13's in the same hole at 45yds or so.

    Good luck with yours. 

    It looks rel nice!

    Link

    kkarmical
    Participant
    Member

    My .22 gives me 60 shots with 18.13' s or polymag's.  A few less with 25.89's.  

    Link

    Polyphemus21
    Participant
    Member

    Have ou tried sending it to Troy Hammer at Annihilator Airguns?

    Link

    Siscakidd
    Participant
    Member

    Like it’s been said Troy is the man when it comes to the puncher line,I am getting 5 mags before a POI shift at just under 30 ft lbs at 35 yds,its a great squirrel gun ,nice and compact with nice punch

    Link

    WickedPlinka
    Participant
    Member

    I bought a lane reg and JSA lever from Troy but have not sent him the gun (yet) I have one more spare stem to install this weekend. Ill see how that goes.

    Link

    Buckeye
    Participant
    Member

    Just got a text from Troy that my PB is done and getting 60 shots at 900 fps with 18gr jsb. Hope to have it by next week.

    Kkarmical, what gun case is that? 

     

    Link

    sevnofspades
    Participant
    Member

    Thanks for all the replies!  Sweet setups everyone has. So ive taken away that the valve stems are prone to breaking , I need to adjust the hammer spring, send it to troy for tuning .

    Anything else?  How is everyones fill probe .Any tips?  I order a yong compressor, so thats how I will be filling until I get a tank

    Link

    kkarmical
    Participant
    Member

    Buckeye

    Just got a text from Troy that my PB is done and getting 60 shots at 900 fps with 18gr jsb. Hope to have it by next week.

    Kkarmical, what gun case is that? 

     

    60 @ 900 is a very good tune, mine is tuned in that range.  You can actually shoot another magazine, and while poi doesn't change fps and fpe does, so I never shoot it down that far.

    http://www.grizzly.com/products/Gun-Case-13-x-31-1-2-x-4-3-4-/BE1170

    link to the gun case.

    Link

    sevnofspades
    Participant
    Member

    Yea I like those cases. Out of stock, but I have to pick one up .

    Are the regs hard to diy?  Im fairly mechanical, but I would hate to f it up .

    But I'm assuming they are def worth putting in. 

    Link

    Buckeye
    Participant
    Member

    I spoke to Troy about if it was worth putting in a Lane regulator, and he said no. These guns already have very good fps spread and get even better after his tune.

    Save your money on a regulator, and get the tune.

    Thanks for the link Kkarmical!

     

    Link

    Buckeye
    Participant
    Member

    Nice dip Sisca, I was going to do that to my PB when I get it back.

    Where did you have it done?    $??

    Link

    sevnofspades
    Participant
    Member

    Interesting. Ill have to send it out to him. I just want to make it as accurate and efficient as possible. I just ordered the harden sear. Anything else besides tune you recommend?

     

    Yea that dip is sick .I also would love to do that. 

    Link

    sevnofspades
    Participant
    Member

    So I found this site https://www.mydipkitstore.com/?gclid=CjwKCAjwhevaBRApEiwA7aT53_7i3aTBO5Ef8Cg_930lSq1djE3QiSE2C8xetBIV_SuNWiNwwumOcxoC-GkQAvD_BwE

    Might be something I'm gonna try

    Link

    Buckeye
    Participant
    Member

    Sevnofspades

    Here is what he does to your PB for a tune.

    It does take some time to get it back, since he is a one man show, but be patient and it will pay off.

    ​​​​​

    Link

    Buckeye
    Participant
    Member

    I found a shop in Toledo that does dips, just starting up, said they can do my PB for $50.

    He was excited about more business when I showed it off.

    For that price I can't go wrong. 

    I will send pics when done.

Viewing 19 posts - 1 through 19 (of 19 total)

You must be logged in to reply to this topic.