ProChrono Ballistic meter

I just bough a ProChrono DLX chronograph and having a hard time making read or it keep giving me an Err code. i have to shoot several times to get one reading and i have to keep the shot one inch or two inches above as well. It have been overcast when i use it.

Am i doing something wrong or it must be super bright to use it? Can i adjust the sensitivity? 
 
I’ve used the pro chrono going back about 15 years and recently got the DLX version that talks to my phone. I think they are great units. I find that on a sunny day it works best to keep the unit in the shade if possible but looking up at the clear sky. On over cast days you will still need it to be bright. It works great with soft overcast lighting as long as it’s bright enough. When it’s overcast I take off the diffusers. Also make sure there are no tree branches or anything that interrupts the sensors view of the sky.

As mentioned above; the best method is to get the light kit that they offer. A little pricey but works very very well. You can use it at night or indoor and it very rarely misses a shot. I even use it outdoor during the day if I have power close enough. I just keep it out of direct sunlight and let the lights do their thing.

Kenny
 
I did these on the cheap, they work great and are much brighter than this photo shows. 
061C378D-12BC-4C63-B25B-1326000E43E5.1652112021.jpeg

 
  • Like
Reactions: Ezana4CE