Power adjuster

  • Views : 200
  • Link

    Jimborg
    Participant
    Member

    I put a power adjuster from Alchemy Airwerks in my 2260 and I've screwed it in as far as I can and still be able to cock it, would that be maximum power then?

    Link

    AirNGasman
    Participant
    Member

    Counter-intuitively, sometimes excess hammer-spring tension can be counter-productive. But if you don't have a chronograph to verify, yes, most likely you're at maximum power now. 

    Link

    Jimborg
    Participant
    Member

    Thanks that's what I thought I just didn't know for sure.

    Link

    Richardo
    Participant
    Member

    I shoot a 2260 in .22. It generates 550fps. I removed the power adjuster as it made very little difference to the gun’s output. It may well be that the adjuster was faulty, but I don’t believe so.

    Link

    Jimborg
    Participant
    Member

    I just shot mine over the chrony yesterday and I was shooting in the high 500's but I also have a boss valve from Alchemy Airwerks in it.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.