Final update
OK if anyone has followed thread , I had gotten a case of 25 cal hades , and in my lelya 2.0 they spiraled bad . , I then detuned my r5 25 cal and they shot well , I then got a 25 caliber barrel from a member here and my leshiy shot them fine ,
Well when I pushed the hades threw barrel they had little drag like they were small for barrel , However the barrel I got from a member here his had very little drag pushing threw the hades pellet too and it shot well ,
I decided to chuck up barrel on lathe , I spent alot of time getting it to spin true within .001 I checked the face it was off .005 and I checked the crown and it was also off almost .004
I first squared end of muzzle and removed .006 , I then made an exact pilot for choke and cut an 11 degree crown with brownells cutter and cut a new crown on lathe , I decided to give barrel a fine tune polish since it was off so I got some 1200 grit paste , I cut a few delron bushings to fit in muzzle and breech and then I made a cast of my choke 2 inches long with a lead type casting materal , which casts at 200 degrees ,
I then cut down my cast .001 and cut some lines in it to hold polishing compound , then I spun lathe and pushed and pulled length of barrel , then cleaned and reinstalled ,
It is shooting now hades perfectly straight / my lelya shot pretty good king heavy's and mk2 , which is why I did not feel it was crown , and I somehow still dont know why it is shooting better but I am happy it is , if anyone has an idea please tell me why thanks LOU