Anyone have an efficient way to do this for .22 cal pellets?
I didn’t come up with anything when I used the search option.
Thanks
I didn’t come up with anything when I used the search option.
Thanks
Pellet Skirt Repair?
- Thread starter ClarkT
- Start date
Upvote 0
G
Guest
Guest
Get yourself a 1/4 or 3/8 hardwood dowel and round the end with coarse sand paper. It will polish and shine up after a couple dozen pellets and work quite well. I like the headphone jack idea as well.
Upvote 0
When loading my magazines, if I see a misshapen skirt, I use the head (gently) of the next pellet I'm going to load to shape the previous skirt. Works every time.
Upvote 0
Do they make a Pellet Tool in the USA that will reshape the Skirt ?
My biggest problem right now is the Shirts are a little too big for the Magazines, the y variation in the Skirts don't allow all the pellets to seat at the same depth.
I need to measure my magazine but can't get a reply from Benjamin about the size of the Armada Pellet Chamber, Barrel Land measurements so I can compare to determine a good Skirt Size to start at.
I find the Crosman Domed .22, 14.3 gr., Pellets fit, find but I will be measuring them too.
My biggest problem right now is the Shirts are a little too big for the Magazines, the y variation in the Skirts don't allow all the pellets to seat at the same depth.
I need to measure my magazine but can't get a reply from Benjamin about the size of the Armada Pellet Chamber, Barrel Land measurements so I can compare to determine a good Skirt Size to start at.
I find the Crosman Domed .22, 14.3 gr., Pellets fit, find but I will be measuring them too.
Upvote 0