I had a Beeman RX1 in .20 cal and it did benefit from using a Beeman sizer with the Japanese made 11gr Silver Jet pellets. Excellent accuracy and additional 15 fps to boot.
Upvote 0
Pellet head size
- Thread starter 270windude
- Start date
I had a Beeman RX1 in .20 cal and it did benefit from using a Beeman sizer with the Japanese made 11gr Silver Jet pellets. Excellent accuracy and additional 15 fps to boot.
Seems to me that sizing the skirt is an unnessessary step. The barrel will do it for you when loading and firing the pellet.
Upvote 0
That is true depending on how deep you seat the pellet. If the pellet isn't seating deep enough to form it to the bore then some blow by will occur if the skirt edge is either damaged or out of round.
Upvote 0
Hey, do you have any chance to measure the BC for the SIG Venom Leads? Say, 10 shots at least 30 or 40y out over the (protected) chrono, and recording the weather data (local pressure mainly, and temp).
That would be a huge help to all of us who watch the BC in order to reduce wind drift and impact power....
Matthias
Upvote 0
My beeman kodiak is more accurate with loose fitting pellets. It seems the looser the fit the more accurate they are.
I use a marble to seat the pellets.
I use a marble to seat the pellets.
Upvote 0