p-rod degassing tool

Forums PCP Airguns p-rod degassing tool

  • Views : 257
  • Link

    lbc_PSI
    Participant
    Member

    Did a search and came up empty.

    Crosman is out of stock..doh!

    Does anyone know:

    1) the length of the P-ROD degassing tool

    2) the thread specs..size and pitch

    I have a lathe and can turn down a machine screw of the appropriate length.

    Thanks in advance.

     

    Link

    Skip-in-WV
    Participant
    Member
    Link

    spysir
    Participant
    Member

    It is possible to de-gas without  the tool using your fill unit.   Hook up fill hose & bring to pressure ( enough to open check valve on pistol) stop pumping or close fill valve. JUST bairly open bleed valve and let dain SLOWLY, you'll likely have to just crack it further as psi drops.   Always double ( & more ) check for zero air before openoing.

     

    John

    Link

    toku58
    Participant
    Member

    Just insert a small allen wrendh into the adjustment hole and push the hammer forward it will open the valve and viola! No need to spend $30

    Remember to make sure the gun is unloaded!!!!

    Link

    lbc_PSI
    Participant
    Member

    Thx for the pic with dimensions.  And the degas tips.  

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.