Become an AGN forum member to be included in our multi-thousand dollar Monthly Airgun Giveaways! Winning is as easy as picking a number, no strings attached! This is our way of thanking you for being a part of the worlds biggest airgun forum. Yours truly, Michael Wendt - Owner.
Join HERE

Oring installation tiny ones

Forums PCP Airguns PCP Airgun – Tuning & Repair Oring installation tiny ones

  • Views : 243
  • Link

    Fullmag
    Participant
    Member
    United States
    Accuracy: +0

    Any tips or tricks for replacing the 2x1NBR90 o rings on my rear reg adjustment screw for my Maverick. Bryan from UA number one use a soft vice and oring picks. They are coming in today and I have the o rings and extras for any errors on my part. Any advice would be welcome these are some tiny parts Thanks in advance

    Mark

    • This topic was modified 3 months ago by Fullmag.
    Link

    Brent
    Participant
    Member
    United States
    Accuracy: +4

    Put a touch of silicone grease on them to ease the slide on. Only a touch it doesn't take much.

    Link

    Fullmag
    Participant
    Member
    United States
    Accuracy: +0

    Thanks Brent!

    Link

    biohazardman
    Participant
    Member
    United States
    Accuracy: +81

    If you have troubles with a smallish o-ring you can make a cone style ramp that will make it easier to stretch the ring out to the right size.  Then just put it next to the part, a regulator screw in this instance, and slide the o-ring on.  A longer more gradual cone that this one has would make it easier.

    Link

    Fullmag
    Participant
    Member
    United States
    Accuracy: +0

    All fixed thank again those have got to be smallest o rings 

    Link

    Fullmag
    Participant
    Member
    United States
    Accuracy: +0

    Thanks bio 

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.